Новое видео на канале Cadence PCB Design and Analysis: 3D Rigid Flex | OrCAD PCB Designer

Интересная статья: Проектирование радиофотонных диаграммообразующих схем фазированных антенных решеток в микроволновой САПР AWR DE

В статье представлены разработанные в специализированной микроволновой САПР AWR DE две модели радиофотонных диаграммобразующих устройств фазированных антенных решеток, реализованные на основе электрических эквивалентных моделей оптических модулей (электрооптического модулятора, линий задержки на брегговских решетках и др.), в которых формирование требуемых амплитудно-фазовых распределений поля в апертуре решетки реализуется на основе оптических линий задержки.

Компания Remcom сообщила в выходе новой версии своего продукта Wireless InSite. Remcom Announces New Version of Wireless InSite 3D Wireless Prediction Software with Engineered Electromagnetic Surface Modeling

Новое видео на канале Altium Academy: Back Drilling in Altium Designer Overview

In this video, we will learn about Back Drilling technology, how to set up back drilling using the layer stack manager, and how to set up the Stub Length sizes for back drilling by specifying applicable nets using the Design Rules Editor.

Новое видео на канале EMA Design Automation: How to Create Fanouts in OrCAD PCB Designer

Интересная статья в блоге Coventor: The Other Side of the Wafer: The Latest Developments in Backside Power Delivery

Новое видео на канале Phil's Lab: Mixed-Signal Hardware/PCB Design Tips - Phil's Lab

Новое видео на канале aldecinc: 1.3 - Active-HDL™ (v13.1) Basics: Library Manager

Новое видео на канале Altium Academy: How to Define A Net Class on Schematic in Altium Designer

Altium Designer makes it easy to define net classes in both PCB and the schematic.Learn how to define a net class in the schematic for whatever classes you need.

Новое видео на канале Robert Feranec: How To 3D Print a Model of Your PCB | Step by Step

Новое видео на канале Siemens Software: Get a PCB ready to manufacture with design for fabrication verification | PCB design flow Chapt. 4.4

Новое видео на канале remcomsoftware: Using Wireless InSite for Engineered Electromagnetic Surface Modeling

Новое видео на канале Synopsys: CoreHW Designing 80-GHz PLL IP using Synopsys Custom Design Platform | Synopsys

CoreHW designed fractional-N PLL IP with fundamental VCO frequency range of 19~20.25GHz, and with RF frequency range extended to 38~40.5GHz and 76~81GHz respectively by the integrated 2x and 4x frequency multipliers using Synopsys Custom Design Family.

Новое видео на канале DipTrace: Project Libraries and Design Cache. DipTrace Feature Review

Новое видео на канале HFSS_for_RF_Application: HFSS Parametric from CSV File

Новое видео на канале Cadence PCB Design and Analysis: Optimize switching regulator design | PSpice

Новое видео на канале Сергея Янкина: Основы моделирования вращающихся электрических машин в COMSOL Multiphysics

Новое видео на канале EEsof AE Tips: Ports setup and assumptions in RFPro-part 1(MoM)

Новое видео на канале Altium Academy: How To Import Libraries and Manage Components With Altium 365

Nothing causes more worries for a designer than the PCB components. Your mind probably starts racing whenever you send out a design for fabrication and assembly, and phone calls start coming in.

Новое видео на канале aldecinc: Active-HDL™ (v13.1) - 1.2 Basics: Design Flow Manager

Новое видео на канале Siemens Software: Using HyperLynx for signal integrity analysis | PCB design flow series: Chapter 4.3

Новое видео на канале Anurag Bhargava: Quantum Computing: Designing for Superconducting Qubits

Learn the fundamentals of designing Superconducting Qubits which is a promising technology for Quantum computing. During the video, you will be introduced to the basic theory & a live demonstration of using ADS/RFPro for simulating such structures easily…

Новое видео на канале Eremex DD: АСКОН - ЭРЕМЕКС, шаги в будущее

Новое видео на канале remcomsoftware: Creating Massive MIMO Arrays Using Wireless InSite's MIMO Array Builder

Новое видео на канале KiCad: 2022 End-of-year Recap!

A group of KiCad developers will review what's been happening in the KiCad project and take questions about the project.

Новое видео на канале EMA Design Automation: How to Create Planes in OrCAD PCB Designer

Новое видео на канале Cadence PCB Design and Analysis: PSpice and Simulink Integration | PSpice

Новое видео на канале Современная Электроника: Компас для Delta Design. Лев Теверовский, АСКОН

Новое видео на канале aldecinc: Active-HDL™ (v13.1) - 1.1 Basics: Workspace

Новое видео на канале EEsof AE Tips: Generating a Parameterized EM model for Physical Design Verification by ADS AMC

Новое видео на канале Altium Academy: How to Improve Routing Using Glossing

Routes for your design can get messy, leading to inefficiency and waste. Altium Designer’s Glossing features can help! Learn how to clean up your interactive routing as you route, how to gloss tracks already routed, and get some tips and tricks to clean them up exactly how you want them.

Новое видео на канале Siemens Software: Using HyperLynx for power integrity analysis | PCB design flow series: Chapter 4.2

Новое видео на канале ELM: Altair PollEx: Урок 1. Анализ и поиск ошибок в схеме. Проверка допуска и полярности компонентов.

Новое видео на канале remcomsoftware: Applying MRT and ZF Beamforming Techniques

Новое видео на канале FlowCAD: New FloWare: Anti Tamper Mesh PCB

Новое видео на канале EMA Design Automation: How to Identify Errors During Schematic Design

Новое видео на канале Cadence PCB Design and Analysis: Design Synchronization | OrCAD Capture CIS

Новое видео на канале EEsof AE Tips: Debugging Layout AEL using VScode by ADS AEL

Новое видео на канале Eremex DD: Новые и старые вызовы для отечественного разработчика САПР электроники

Новое видео на канале Robert Feranec: How to design perfect switching power supply | Buck regulator explained

Новое видео на канале Siemens Software: HyperLynx electrical rule checker automates PCB layout verification | PCB design flow: Chapter 4.1

Новое видео на канале Altium Academy: How to Highlight or Select Net Connections in the PCB

Learn how to highlight net selections so you can easily track where connections are made. We cover how to hide and show nets, how to use the view configuration and PCB panels to view and highlight nets across your design, and how to assign net colors in both the PCB and the schematic.

Новое видео на канале DipTrace: Shifted Pad Hole. DipTrace Feature Review

Новое видео на канале remcomsoftware: Analyzing the Signal-to-Interference Plus Noise Ratio

Новая статья на сайте WIPL-D: Radiation Patterns and VSWRs of Handheld Devices in Several Real-Life Scenarios

Four scenarios encompassing handheld communication device in various real-life environments are discussed. In all the scenarios, results of interest are VSWR and radiation pattern presented using absolute gain.

Новое видео на канале Ansys Photonics: New Photonic Verilog-A Mode Converters

Новое видео на канале Cadence PCB Design and Analysis: Design Difference Viewer | OrCAD Capture CIS

Новое видео на канале EEsof AE Tips: Building a Scalable EM model for a Square Inductor by ADS CoilSys

Новое видео на канале Robert Feranec: How to minimize noise in your OP AMP and ADC circuits

Новое видео на канале Altium Academy: How to Edit Components in the PCB View

Once you’ve placed your ECO components into the PCB you may need to edit them. Learn how to edit your components in the PCB view in this Altium Designer training video.

Интересная статья в блоге Coventor: Understanding Q-Factors in Gas Encapsulated MEMS Inertial Sensors

Новое видео на канале Siemens Software: Using electrical rule checker in Xpedition to check PCB electrical integrity | PCB design flow 3.9

Новое видео на канале remcomsoftware: How Pilot Contamination Affects Massive MIMO Beamforming

Новое видео на канале EMA Design Automation: Coupling Analysis with Sigrity Aurora

Новое видео на канале EEsof AE Tips: Developing Debug Measurement Expressions AEL vscode by ADS

Новое видео на канале DownStreamtech: Scripting options in CAM350

This video talks about how you can use Visual Basic to write scripts for CAM350. There is a script recorder built into the tool, along with debugging and a Script Editor. The help system also has a description of our API.

Новое видео на канале DipTrace: Teardrops for T-junction. DipTrace Feature Review

Новое видео на канале Altium Academy: Microcontroller-Based Hardware Design With Altium Designer - #9 PCB Routing Tips

This video focuses on key points when it comes to PCB routing, including tips on switching regulator routing, power and data signal routing, as well as looking at Altium Designer’s “Design Rule Check” feature. Created by Philip Salmony, Tech Consultant for Altium and the mind behind Phil's Lab.

Новая статья в блоге CENOS: An independent comparison of Antenna Magus, CST, and CENOS RF

Новое видео на канале Siemens Software: How a PCB designer can check signal integrity | PCB design flow series: Chapter 3.8

Новое видео на канале Ansys Photonics: New Distributed MODE Solver with MPI in EME

Новое видео на канале ELM: Поиск отличий в схеме, топологии и спецификации при помощи Altair PollEx CP

Новое видео на канале remcomsoftware: Wireless InSite's Built-In Optimizations Create Efficiencies

Новое видео на канале Современная Электроника: Delta Design: перспективы развития. Сергей Пилкин, ЭРЕМЕКС

Анонсирована версия Antenna Magus 2023. В новую версию добавлено несколько новых типов антенн и решеток, ориентированных на конкретные приложения.

Новое видео на канале Altium Academy: How to Edit or Manage Board Shape in Altium Designer

Board shapes can be edited and managed in a variety of ways in Altium Designer. Learn how to do this using 2D and 3D modes/models as well as importing from DXF or DWG.

Новое видео на канале simbeor: Instant PCB Interconnect Impedance Analysis 2022 (part 2)

Новое видео на канале Siemens Software: Verifying PCB routing against constraints | PCB design flow series: Chapter 3.7

Новое видео на канале ELM: Моделирование работы автомобильного радара в Altair WinProp и Feko 2022

Новое видео на канале Cadence PCB Design and Analysis: Hierarchical Design | OrCAD Capture CIS

Новое видео на канале Synopsys: Design and Verify RFICs – Part 3 | Synopsys

In Part 3 of this series, we provide an overview of custom layout solutions, show post-layout verification demonstrating DRC vs. LVS validation, sign-off of EM modeling, and then demonstrate the final RFIC simulation results.

Интересная статья в блоге Coventor: In situ Metrology for Etch Endpoint Detection

Новое видео на канале Altium Academy: When to Use an Autorouter in PCB Design

Autorouters in PCB design are a bit of a contentious topic. In this tutorial, Tech Consultant Zach Peterson explores why you would and wouldn't want to use an autorouter, as well as how to use Altium Designer's autorouter tool.

Новое видео на канале MATLAB: Implementing Frequency-Hopping on Xilinx RFSOC Devices with SoC Blockset

Новое видео на канале remcomsoftware: Massive MIMO Benefits for 5G

Новое видео на канале Phil's Lab: Differential Pairs - PCB Design Basics - Phil's Lab #83

Differential pair PCB design basics, covering differential signalling benefits, references, impedance control, inter- and intra-pair matching, and termination.

Новое видео на канале simbeor: Instant PCB Interconnect Impedance Analysis in Simbeor 2022 (part 1)

Новое видео на канале EMA Design Automation: Reflection Analysis with Sigrity Aurora

Новое видео на канале Synopsys: Design and Verify RFICs – Part 2 | Synopsys

In Part II we will demonstrate EM modeling of inductors and then demonstrate RFIC simulation results analsys using Synopsys PrimeWave Design Environment.

Новое видео на канале Eremex DD: Гибко-жесткие печатные платы. Шаблоны слоев платы

Новое видео на канале Altium Academy: How to Create Complex Keepout Shapes in Altium Designer

Keepout regions are easy to create in Altium Designer, but they can be complex. Learn a few ways to make creating your more complex keepout shapes easier and more efficient.

Интересная статья в блоге Coventor: Creating Airgaps to Reduce Parasitic Capacitance in FEOL

Новое видео на канале Cadence PCB Design and Analysis: Place Replicate | OrCAD

Новое видео на канале remcomsoftware: Using 3D Ray-Tracing to Overcome Beamforming Multipath Challenges

Продолжает работу Школа синтеза цифровых схем, которая была организована в 2020 году. С тех пор прошло уже три сессии Школы и сейчас проходит четвертая сессия, которая стартовала 10 сентября 2022 года и пройдет до апреля 2023 года. Занятия проходят в Технопарке Сколково по субботам и транслируются на YouTube канал Школа синтеза цифровых схем, к которому подключаются 10 кластеров Школы на базе ВУЗов в различных городах России. Кроме того, свободно могут подключаться все желающие. На текущую сессию мы получили порядка 400 заявок. На канале Школы можно найти записи всех занятий.

Новая статья на сайте TICRA: Optimization of a Multibeam Satellite-Mounted Phased Array-Fed Reflector with Power Constraints

Новое видео на канале Robert Feranec: When a Signal Hits The End of a PCB Track - What happens? | Reflections by Eric Bogatin

Новое видео на канале EEsof AE Tips: Binning model utilities in MBP

Новое видео на канале Synopsys: Design and Verify RFICs – Part 1 | Synopsys

In Part 1 we introduce an RF design flow based on Synopsys Custom Design Family which is tightly integrated with Ansys EM solutions. This video describes specification of a LNA amplifier and demonstrates synthesis of the LNA inductor layout.

Новое видео на канале Altium Academy: How to Use HDI Stackups during BGA Design

Micro Vias and Buried Vias play an important role in high-density interconnection layer stackups (HDI Stackups). Learn how to add vias and create rules to allow you to take full advantage of the HDI Stackup.

Новое видео на канале EMA Design Automation: Verify Impedance Discontinuities with Sigrity Aurora

Новое видео на канале Cadence PCB Design and Analysis: Impedance Analysis | OrCAD

Новое видео на канале MATLAB: PCB Antenna Design and Optimization

Новое видео на канале remcomsoftware: Wireless InSite MIMO Optimizations and Beamforming Techniques

Интересная статья в блоге Coventor: Automotive MEMS accelerometer design verification – A real life example

Новое видео на канале Eremex DD: Гибко-жесткие печатные платы. «Материалы»

Новое видео на канале cae_expert: ANSYS. Моделирование электрических машин на платформе ANSYS

Новое видео на канале MATLAB: What Are Phased Arrays?

Новое видео на канале DipTrace: Keep All Model Pins. DipTrace Feature Review

Старое, но полезное видео: Wi-Fi Inverted-F antenna (IFA Antenna) design and analysis in Ansys HFSS

Новое видео на канале EMA Design Automation: Constraint Floor Planning Part 2 How to Apply Constraints and Resolve Errors

Новое видео на канале Altium Academy: How to Use the Component Retrace Tool in Altium Designer

The Component Retrace Tool in Altium Designer is a powerful addition to any PCB designer's toolkit. But how does it work? In this video, Tech Consultant Zach Peterson explores how to access and activate it, as well as some of the capabilities for component rearrangement using the Component Retrace Tool.

Новое видео на канале Siemens Software: Concurrent design in Xpedition: Setting up routing & tuning on DDR4 interfaces | Chapter 3.6

Новое видео на канале Modelithics: Modelithics Short Waves: Orientation Selectability within the Modelithics Capacitor Models

Новое видео на канале cae_expert: ANSYS. Обзор методов для моделирования асинхронных двигателей. Вебинар

Новое видео на канале MATLAB: HDL Cosimulation with AMD Xilinx Vivado Simulator

Новое видео на канале Synopsys: Designing in the Age of AI | Synopsys

Learn about the drivers for implementing AI across a broad range of chip architectures and technologies that are being embraced by leading design teams to accelerate the integration of AI into their SoCs.

Новое видео на канале DipTrace: Vectorized Picture. DipTrace Feature Review

Новое видео на канале Cadence Design Systems: Creating Parts in Allegro System Capture Using Imported Symbols

Новая запись вебинара 3DS: Getting Ahead with Semiconductor Manufacturing Equipment

Новое видео на канале Phil's Lab: FPGA + PCIe Hardware Accelerator Design Walkthrough (DDR3, M.2, ..) - Phil's Lab #82

Walkthrough of FPGA-based (Xilinx Artix 7) PCIe hardware accelerator in an M.2 form-factor (e.g. for laptops, computers) including DDR3 memory, quad buck converter, controlled impedance, assembly documentation, and more!

Новое видео на канале Siemens Software: Understanding fanout and breakout on DDR4 chips | PCB design flow series: Chapter 3.2

Вышла очередная версия KiCad 6.0.9. The KiCad project is proud to announce the latest series 6 stable release. The 6.0.9 stable version contains critical bug fixes and other minor improvements since the previous release.

Новое видео на канале Altium Academy: How To Create Your Own Libraries in Altium Designer

Learn how to create your own schematic symbols and footprints from scratch using Altium Designer. Philip Salmony, Tech Consultant for Altium and the mind behind Phil's Lab, guides you through creating libraries including how to use the IPC-compliant footprint wizard to create a resistor and a capacitor.

Новое видео на канале Altair How-To: Altair SimSolid Transient Thermal Analysis

Новое видео на канале Eremex DD: Линейка ОСРВ FX-RTOS для встраиваемых применений

Новое видео на канале Anurag Bhargava: RFPro-24: Simplifying Multilayer EM Simulations with RFPro

Watch this video to understand how can you simplify your multilayer EM simulations with great ease in RFPro without having to modify stackup or layout in any manner.

Компания #Modelithics выпустила очередную версию библиотеки COMPLETE Library™ v22.5 for Keysight Technologies’ PathWave Advanced Design System. Добавлено 26 новых моделей.

Новое видео на канале DipTrace: Text and Pictures Rotation. DipTrace Feature Review

Новое видео на канале EMA Design Automation: Constraint Floor Planning with Sigrity Aurora

Новая запись вебинара 3DS: Electronic Design Analysis for PCBs, Packages and Devices

Новое видео на канале Siemens Software: How to use Xpedition Enterprise for FPGA optimization| PCB design flow series: Chapter 3.5

Новая статья на сайте WIPL-D: Designing a Band Pass Filter with WIPL-D Filter Designer

A process of microstrip filter design has been described in this application note with a special focus on a technique of filter optimization, a simplified case of Space Mapping method. As a result of the design process a microstrip filter ready for sample fabrication is available with minimum human and numerical effort.

Новое видео на канале cae_expert: ANSYS HFSS. ANSYS. Подходы к моделированию влияния электромагнитного излучения на человека в HFSS

Новое видео на канале Altium Academy: How to Create BGA Footprints with the Footprint Wizard

Altium Designer makes it easy to create a BGA footprint using our IPC-compliant footprint wizard. Learn how easily you can create and modify a BGA footprint using the footprint wizard.

Новое видео на канале Xpeedic: Power Integrity DC Flow

Новое видео на канале Robert Feranec: Designing a FLEX PCB? You Need To Know This ….

Новое видео на канале DownStreamtech: Drill Symbol creation

In this video, we take a look at how to create custom drill symbols in BluePrint PCB.

Новое видео на канале Cadence PCB Design and Analysis: Parametric Sweep Analysis with PSpice | PSpice

Компания Power Integrations сообщила, что запустила новую функцию в своем продукте PI Expert™, представляющую собой мощный онлайн инструментарий для автоматизированной разработки источников питания по формализованному техническому заданию.

Новая запись вебинара 3DS: Complete Solution for Antenna Array Design and Optimization

Новое видео на канале Maya HTT: Hands on Simulate Series with Simcenter Flotherm XT - Part 1

Новое видео на канале Altium Academy: How to Control Component Placement to Design for Manufacturability

Component placement is a crucial part of making sure your design is manufacturable, so you need to be able to control placement. Learn how, through rules and courtyard layers, to maintain accessibility and manufacturability in your entire design through component placement control.

Новое видео на канале Xpeedic: 3DIC Flow in Metis

Новое видео на канале Siemens Software: PCB thermal analysis with FloEFD | PCB design flow series: Chapter 2.6

Новое видео на канале Cadence PCB Design and Analysis: Design for Manufacturing | OrCAD

With a full suite of DFM checks including Design for Fabrication (DFF), Design for Assembly (DFA), and Design for Test (DFT) running in real-time while you design, you’ll complete your design fast and signoff with confidence.

Новое видео на канале DownStreamtech: Crossprobing CAM350 and CAD Systems (Cadence Allegro, PADS, Xpedition, Orcad)

This video demonstrates the crossprobing function between CAM350 and CAD tools. In this particular video, we crossprobe to Cadence Allegro. We use both CAM350 and CAMvu from Downstream Technologies. The advantage of using CAMvu is that you are not using a CAM350 license. CAMvu is a free .cam database viewer.

Новое видео на канале Robert Feranec: How Does a CPU Work and How To Create Your Own Processor

Новое видео на канале EMA Design Automation: How to Create IPC Compliant Footprint in OrCAD PCB Editor 17.4

Новая запись вебинара 3DS: Parametric & Non Parametric Shape Optimization of Electromagnetic Components

Новое видео на канале Altium Academy: Microcontroller-Based Hardware Design With Altium Designer - #2 Buck Converter

Новое видео на канале Cadence PCB Design and Analysis: Sensitivity Analysis | PSpice

Discover which components have the most effect on circuit performance and select higher quality strict tolerance components just for those that matter, and save money on components in your circuit that don’t.

Новое видео на канале Siemens Software: FPGA optimization is integrated into Xpedition | PCB design flow series: Chapter 2.4

In this video, the PCB designer performs FPGA optimization of pin assignments to reduce the breakout and fanout route effort which improves the signal integrity and reduces the board fabrication cost.

Новое видео на канале MATLAB: How to Deploy Frame-Based Models to FPGA/ASIC Using HDL Coder

Новое видео на канале DipTrace: Multi-line Text. DipTrace Feature Review

Новое видео на канале Altium Academy: Microcontroller-Based Hardware Design With Altium Designer - #1 Introduction and Part Selection

Новое видео на канале Xpeedic: Channel Analysis Flow in High Speed Digital Design

Новое видео на канале Сергея Янкина: Основы работы в COMSOL Multiphysics®. Версия 6.0

Новое видео на канале Cadence PCB Design and Analysis: Transient Analysis | PSpice

Simulating your designs allows you to be aware of the limitations of your components. It’s important to analyze your circuit before moving to layout. Analysis helps identify possible field failures allowing you to reduce development time and cost.

Новое видео на канале Phil's Lab: Mini 6-Layer Mixed-Signal Hardware Design Walkthrough - Phil's Lab #78

Walkthrough of double-sided assembly, 6-layer mixed-signal hardware design (overview, schematic, and PCB) of a digital signal processing board for audio. Tips and tricks along the way for schematics, PCB layout and routing, and manufacturing.

Компания Ansys купила компанию C&R Technologies для интеграции ее продукта теплового моделирования Thermal Desktop в свое портфолио. Ansys to Add Thermal Desktop to Portfolio Through Acquisition of C&R Technologies.

Новое видео на канале Altium Academy: How to Reroute without Rerouting!

Learn how to quickly adjust your routing settings in Altium Designer in this PCB training video. Follow along with Tech Consultant Zach Peterson as he reroutes without rerouting, using the selection filter settings and query engine.

Новая запись вебинара 3DS: Electronic Device Macromodeling, Circuit and 3D Electromagnetic Simulation

Новое видео на канале Robert Feranec: How to Design and Simulate PCB Antenna

Новое видео на канале Cadence PCB Design and Analysis: Smoke Analysis | PSpice

Create more reliable designs that won’t fail in the field. Smoke analysis ensures that all components in the circuit are working within safe operating limits.

Новое видео на канале DipTrace: Getting Board Outline from a bunch of Shapes. DipTrace Feature Review

Новое видео на канале TechXCorp: TWSS2022 Dr. Tom Jenkins: Modeling Low-Temperature Gas Discharge With VSim

Новое видео на канале EMA Design Automation: Introduction to OrCAD Capture: Understanding the User Interface

Новое видео на канале EEsof AE Tips: ICCAP: Using the GaN ASM-HEMT Model Extraction Procedure

Новое видео на канале Altium Academy: What to Consider when Designing a Silkscreen Layer

The silkscreen layer allows you to add text and extra detail that will appear in your final designed board. Learn how to get started and what to look for when creating a silkscreen.

Новое видео на канале Keysight Design Software: PathWave ADS 2023 High Speed Digital Latest Design Innovations You Shouldn't Miss!

This video provides an overview of some of the latest design innovations for High-Speed Digital designers using Pathwave Advanced Design System (ADS) 2023 including Memory Designer, SerDes design, and PIPro design innovations.

Новое видео на канале Polar Instruments: Structure view simplifies management of layer stack design for PCBs with many transmission lines.

Новое видео на канале Altium Academy: How to Set Copper to Edge Clearance in Altium Designer

Новое видео на канале Altium Russia: Используйте проверенные решения эффективно!

В рамках вебинара были подробно рассмотрены шаги по созданию и размещению повторяющихся блоков в проекте, а также даны некоторые практические рекомендации по их эффективному использованию.

Новое видео на канале Cadence PCB Design and Analysis: Monte Carlo Analysis | PSpice

Predict component failure before your design arrives at manufacturing. Monte Carlo Analysis helps you statistically predict component failures in your designs so you can adjust component tolerances to maximize your manufacturing yield.

Новое видео на канале СОВРЕМЕННАЯ ЭЛЕКТРОНИКА: Delta Design: кому нужен CAM. Сергей Попов, менеджер по продукту, ЭРЕМЕКС

Новое видео на канале Cadence Design Systems: What's New in Voltus IC Power Integrity Solution - SSV 22.1

Новое видео на канале Altium Academy: FPGA and BGA PCB Power Delivery Best Practices

BGA power delivery, and in particular FPGA, with multiple, high-current voltage rails can seem daunting. In this video, Philip Salmony, Tech Consultant for Altium and the mind behind Phil's Lab guides you through best practices for power delivery and decoupling of FPGAs in BGA packages.

Новое видео на канале TechXCorp: TWSS2022: Dr. Daniel Main, Using VSim to Optimize your Magnetron Sputtering Setup

Новое видео на канале Eremex DD: Синтез и моделирование фильтров в модуле Delta Design SimOne

Новое видео на канале EMA Design Automation: How to Sync the Schematic and PCB in OrCAD

Новое видео на канале Cadence PCB Design and Analysis: How to easily navigate to various design objects in Allegro System Capture | Allegro System Capture

Navigating to different design objects can be annoying if it’s a big schematic having more than 50 pages. Allegro System Capture provides an easy and quick way of navigation by proving Navigation toolbars, RMB menus, TOC, hyperlinks and more.

Старое, но полезное видео на канале Страничка инженера: 8. Обзор САПР для программирования ПЛИС Xilinx с примером использования (Vivado)

Новое видео на канале Altium Academy: Creating Continuous Integration Pipelines for FPGAs

Новое видео на канале DipTrace: Drawing Arc. DipTrace Feature Review

Новое видео на канале Ansys: Inside Electromagnetic Effects: The Particle-In-Cell Solver for Space and Semiconductor Applications

EMA product manager and staff scientist Kevin-Druis Merenda discusses the numerical methods employed by the solver technology of EMA3D Charge (the Finite Element Method, Particle-in-Cell and a nonlinear module.)

Новое видео на канале Siemens Software: What's new in PADS Professional VX.2.12

Новое видео на канале Altium Russia: Как ускорить разработку устройства? Новые подходы

В рамках вебинара Вы узнаете, о преимуществах нового подхода применения блоков для повторного использования (Reuse Blocks), а также познакомитесь с панелью Design Reuse, пришедшей на замену панели Snippets.

Интересная статья в блоге Coventor: Pathfinding by process window modeling: Advanced DRAM capacitor patterning process window evaluation using virtual fabrication

Новое видео на канале TechXCorp: TWSS2022 Dr. Smithe, Modeling Ohmic Surface Losses in VSim

Новая статья на сайте WIPL-D: Lowering Ship RCS

This application note outlines utilization of WIPL-D Pro Software, a full wave 3D electromagnetic Method-of-Moments (MoM) based software. The software is used to simulate three models of the electrically large ship in monostatic scattering operating mode at the operating frequency of 1 GHz without any reduction applied.

Новое видео на канале Altium Academy: FPGA Pins Explained!

Compared to microcontrollers, FPGAs typically have many more configurations, power supply pins, and general I/O. In this video, Philip Salmony, Tech Consultant for Altium and the mind behind Phil's Lab, details what connections need to be made to ensure your FPGA-based hardware design works correctly.

Новое видео на канале FlowCAD: Digital Solder Mask in OrCAD and Allegro

A new generation of inkjet printers enables the selective application of solder resists during circuit board production. This results in new areas of application and a changed process in the design flow. In addition to material savings, this process also opens up new, creative and technically different solutions. These are of particular interest in the area of high voltage and power electronics, for example for e-mobility. The PCB Designer can automatically define masks for digital solder resist - with only a few specifications for minimum land widths, minimum distances and offsets.

Компания Simberian сообщила о выходе новой версии своего продукта Simbeor 2022.02 с рядом новых уникальных модулей.

Simbeor 2022.02 with unique features has been released. Major addition in this version is SI Compliance Analyzer™ tool for fast and consistent post-layout signal integrity verification with simulation-based electrical rule checking (ERC), basic signal integrity analysis (Fast SI), and advanced 3D EM signal integrity analysis (3D SI). Completely re-designed extremely fast and accurate PCB geometry conversion into SI models and accelerated field solvers dramatically reduce interconnects compliance analysis time.

Интересная статья в блоге Coventor: Modeling an Actual Foucault’s Pendulum – Design Implications for MEMS Gyroscopes

Новое видео на канале EMA Design Automation: Topology Explorer Part 5: How to Source Synchronous Sweep Simulations with TopXplorer

Новое видео на канале Altium Academy: What’s New in Altium 365 September 2022: Library Importer, Generic Components, & MCAD CoDesigner

Новое видео на канале Siemens Software: What's new in HyperLynx VX.2.12

It’s here: the new VX.2.12 release of HyperLynx delivers powerful new capabilities for DDR5 analysis, serial link compliance analysis, and electrical design rule checking.

Новое видео на канале EEsof AE Tips: Encrypted Components in Keysight ADS

This video uses a K-band filter as an example to go through the flow of generating and using encrypted model in Keysight EMPro. It enables you share your design to others while protect your design IP.

Новое видео на канале Altium Academy: Top 5 Beginner PCB Design Mistakes (and how to fix them)

Learn the most common beginner PCB design mistakes that can negatively impact EMI and SI, as well as how to fix them. Check out tips and tricks on trace widths, clearances, decoupling, vias, and more! Created by Philip Salmony, Tech Consultant for Altium and the mind behind Phil's Lab.

Новое видео на канале Cadence PCB Design and Analysis: Clarity 3D Product Overview

The Clarity 3D Solver makes it easy to analyze systems, PCBs, packages, and other high-speed interfaces. Simulate complex geometries and structures to extract highly accurate S-parameter models for use in SI, PI and RF analysis.

Новое видео на канале Robert Feranec: Must Know This to Understand High Speed PCB Layout Simulation | S-Parameters Explained, Eric Bogatin

Новое видео на канале EMA Design Automation: Introduction to Allegro PCB Editor 17.4 PCB Design Overview

Новое видео на канале MATLAB: FPGA, ASIC, and SoC Development with MATLAB and Simulink

Watch an overview of ways your projects can benefit by connecting MATLAB® and Simulink® to FPGA, ASIC, and SoC development. Learn about the variety of ways that customers can improve their productivity or even target FPGA hardware for the first time.

Новое видео на канале DipTrace: PCBWay via DipTrace. DipTrace Feature Review

Новое видео на канале Siemens Software: What's new in Xpedition IC Packaging VX.2.12

Discover the new features and capabilities of the VX.2.12 release for Xpedition IC Packaging. We’ve made it easier for users to define automation, added tools to increase designer productivity, improved guidance-driven design, and expanded tape-out capabilities.

Новое видео на канале Keysight Design Software: Power Amplifier Measurement: Demo with Envelope Tracking - Part 5

This series of videos talks about Power Amplifier (PA) measurement with Digital Pre-distortion (DPD) and Envelope Tracking (ET) technology using Keysight's PathWave X-Series Measurement Applications and PXIe VXT transceiver. ET is a technology recently used in wireless communication system's RF front-end which apply the variable voltage supply instead of fixed voltage supply for power amplifier.

Новое видео на канале Cadence PCB Design and Analysis: Rigid Flex and 3D | OrCAD

3D helps you visualize your end-product. By viewing your designs in interactive 3D, you can easily change the camera view to get a different perspective. And if your board has any flex regions, you can easily bend your design to see how it comes together for assembly.

Новое видео на канале Altium Academy: QFN Layout and Routing - Tips & Tricks

QFN (quad-flat no-lead) packages and their surrounding components can be difficult to lay out and route on a PCB, due to their small size and narrow pitch. Learn how to make QFN design easy with Altium Designer, featuring Philip Salmony, Tech Consultant for Altium and the mind behind Phil's Lab.

Новое видео на канале Modelithics: Deeper Dive Filter Design with Ansys Nuhertz FilterSolutions & Modelithics Microwave Global Models

Новое видео на канале TechXCorp: Evening VSim12 Preview Webinar

Новое видео на канале EMA Design Automation: How to Create IPC Compliant Symbols in OrCAD Capture

Новое видео на канале MATLAB: Discover What's New: R2022b Release Highlights for MATLAB and Simulink

Release 2022b offers hundreds of new and updated features and functions in MATLAB® and Simulink®, along with four new products. There are new tools for preprocessing and analyzing data, writing scripts and algorithms, building apps, and team-based software development. And by the way, MATLAB is faster than ever.

Новое видео на канале Сергея Янкина: Виртуальное исследование помехоустойчивости и помехоэмиссии печатной платы в COMSOL Multiphysics

Новое видео на канале Siemens Software: What's new in Xpedition VX.2.12

In the new VX.2.12 release of Xpedition Enterprise, we've improved schematic definition, high-speed routing, MCAD collaboration, AMS modeling, and team collaboration.

Новое видео на канале Altium Academy: Altium Designer's Design for Manufacturing (DFM) Tools Overview

During your design process, there are simple steps you can take to focus on Design for Manufacturing, or DFM. Altium Designer has a unique set of tools you can use to make the DFM process efficient ensuring manufacturability. In this overview, learn about some of the topics we'll cover in upcoming videos about the DFM tools Altium Designer offers you.

Новое видео на канале Cadence PCB Design and Analysis: How to generate Netlist from Schematic | Allegro System Capture

Schematic is the core of PCB layout, any minor change in the schematic should be reflected in the layout to avoid any errors. With Allegro System Capture, it’s easy to generate the PCB layout from the schematic and easily synch the schematic with the layout if there are any changes while designing.

Новое видео на канале Keysight Design Software: Linking Circuit and System Design Accurate Behavioral Modeling for 5G

5G and mmWave design are challenging traditional partitioning of system and circuit-level design. Understanding the wireless system performance of the entire communication link is critical to early success and rapid deployment of technology. This webinar discusses advanced modeling techniques and workflow approaches for RF circuit and system co-design.

Новое видео на канале DipTrace: Mouser Part Number. DipTrace Feature Review

Новое видео на канале Labcenter Electronics: Curved PCB Routing and Editing

The curved routing capabilities of Proteus PCB Design have been greatly improved. The new, smarter system will actively adjust corner radius as per user specified limits as well as curved mitres

Новое видео на канале Altium Academy: Как ускорить разработку устройства? Новые подходы

В рамках вебинара Вы узнаете, о преимуществах нового подхода применения блоков для повторного использования (Reuse Blocks), а также познакомитесь с панелью Design Reuse, пришедшей на замену панели Snippets.

Новое видео на канале Anurag Bhargava: ADS2023 Top10 - Feature 10: Memory Bus Designer

Watch how Memory Bus Designer in ADS2023 simplifies your otherwise complex job to create a complete memory channel. New capabilities allow designers to create Data or Cmd/Add channels with great ease of use & increased productivity

Новое видео на канале Сергея Янкина: 3D расчёт ёмкостных и индукционных характеристик подводных кабелей в COMSOL Multiphysics

Численный анализ систем силовых кабелей представляет собой актуальное и активно развивающееся направление исследований. В нём сочетаются передовые научные идеи, инженерная практика, и эмпирические модели. Важным критерием является стоимость производства и долговечность системы.

Новое видео на канале Altium Academy: How to Create PCB Schematics in High-speed Projects

There are several powerful features in Altium Designer for creating schematics in high-speed projects. Get introduced to a few, such as how to utilize nets, net classes, blankets, design rules, and differential pairs.

Новое видео на канале Ansys Photonics: New RCWA Electric/Magnetic Field Results

Новое видео на канале Cadence PCB Design and Analysis: How to predict routing violations before or during routing | Allegro PCB Designer

Routing signals and vias isn't a simple task as it looks like. If the routing patterns doesn't meet specific design rules, your design might fall for signal integrity issues. It’s easy to monitor routing and optimize your design using route vision in Allegro PCB Designer.

Новое видео на канале EMA Design Automation: Topology Explorer Part 4: Adding a SPICE Model and Lossy Transmission Lines

Новое видео на канале Keysight Design Software: Physical Layer Modeling Principles of 5G New Radio

In this webinar, Sangkyo Shin addresses 5G Physical Layer Design challenges and explains the need for model-based design. He delves into phased array system simulation using various device models, and simulates a 3GPP end-to-end radiated simulation using a practical hardware model. Lastly, he discusses system level engineering using the circuit envelope model.

Новое видео на канале Micro Talks: Complete explanation about Antenna design for Biomedical Application. Textile antenna

In this video we demonstrate how the assembly layer of the PCB output can be applied and set with custom graphics ready for outputting to project specific documentation or PCB manufacture.

Новое видео на канале Labcenter Electronics: Proteus PCB Assembly Layer Editing

In this video we demonstrate how the assembly layer of the PCB output can be applied and set with custom graphics ready for outputting to project specific documentation or PCB manufacture.

Новая статья на сайте TICRA: Array Decomposition Method for Arbitrary-Element Regular Arrays using Higher-Order Basis Functions

Новое видео на канале DipTrace: Pattern Generator. TO-220. DipTrace Feature Review

Новое видео на канале Altium Academy: Altium Designer Quick-Start Tutorial with Phil Salmony from Phil's Lab

Design a simple, two-layer PCB in Altium Designer, navigating from project creation, schematic capture, PCB design, and finally manufacturing files. The perfect video if you've not used Altium Designer or any ECAD tool before. Created by Philip Salmony, Tech Consultant for Altium and the mind behind Phil's Lab.

Новое видео на канале Ansys: Inside Electromagnetic Effects: Simulating EMI & EMC Effects

EMA President Tim McDonald discusses how EMA3D Cable's solver technology, as well as integrations with other Ansys tools, both lend themselves to highly accurate and rapid ESD and EMI modeling & simulation, facilitating design team efforts to meet EMC requirements for their development projects.

Новое видео на канале Anurag Bhargava: ADS2023 Top10 - Feature 9: Memory Designer Enhancements

Simulating Memory performance is seen as a challenging task as simulation set up can be pretty complicated. Learn how you can simplify the job with Memory Designer in ADS and learn about the latest enhancements in ADS2023

Новое видео на канале Cadence PCB Design and Analysis: How to predict component placement violations earlier | Allegro PCB Designer

Mostly DRC checks are applicable after or during routing, which requires modification in component placement, and it increases the time to complete the design. With Allegro PCB Designer, you can easily predict these violations earlier during component placement using placement vision.

Новое видео на канале EMA Design Automation: Topology Explorer: Topology Explorer Part 3: TopXp GUI Overview and Adding Circuit Elements for Simulation

Новое видео на канале remcomsoftware: Benefits of Using an FDTD Full-Wave Solver

Новое видео на канале Keysight Design Software: 5G Design and Analysis for RF and MW Design Engineers

Circuit designers are on the leading edge of new technology standards, including 5G. This webinar describes design techniques, simulation, and analysis of a 5G 28-GHz phased-array transmit chain with 4×4 beam-steered patch antenna array.

Новое видео на канале DownStreamtech: Align and Move commands

This video show how to register data using either the Align or Move commands. Registering data is a common procedure in CAM350, some of the more common uses; layer compare, design compare, and netlist compare. There are reason for using one of these commands vs the other, and these are explained in the video.

Новое видео на канале Ansys Photonics: New polarization reporting for supported optical modes in FEEM

Новое видео на канале Altium Academy: How to Work with Design Variants in Altium Designer

Altium Designer’s Draftsman Document allows for several different board views and variants that you can work with. We’ll show you how to add new variants and work with their properties to display exactly what you need in your Draftsman Document.

Новое видео на канале Labcenter Electronics: Linear Route Editing Proteus v8.15 Update

A short video demonstrating the updates to the linear routing system in Proteus PCB Design. These include improved 45 degree route dragging and intelligent segment mitring.

Новое видео на канале Сергея Янкина: Проведение электростатических расчётов в COMSOL Multiphysics

Электростатические расчеты применяются при моделировании широкого спектра электротехнических систем и устройств, в числе которых конденсаторы, изоляторы, МЭМС-датчики и актуаторы, пылевые фильтры, системы электродов для экранирования, микрофлюидики и электронной оптики и т.п.

Новое видео на канале Cadence PCB Design and Analysis: Ensure design reliability using schematic integrity checks | Allegro System Capture

Today’s electronic designs are complex with thousands of components and hundreds of pages. Any component failure missed early in the design stage might lead to re-spins and delay time to market. Allegro System Capture provides a fully integrated solution to perform design audit without requiring proprietary models.

Новое видео на канале Anurag Bhargava: ADS2023 Top10 - Feature 8: S-Parameter Toolkit Enhancements

Learn how multiple hours of a job can be simplified to a couple of minutes by using the S-Parameter toolkit in ADS2023. With new complex measurements such as Power Sum Crosstalk, ICR and ICN can be done with a click.

Новое видео на канале EMA Design Automation: Topology Explorer: Topology Explorer Part 2: Topology Extraction and Controller Model Assignment

Новое видео на канале remcomsoftware: ESD Simulation Workflow

Новое видео на канале Keysight Design Software: Flexible Extraction of Today's Wide-Bandgap Device Models with IC-CAP GaN RF Solutions

Device Modeling experts Abby Shih and Mark Knutson discuss flexible modeling of wide-bandgap device models by starting with a flexible modeling sandbox and giving an overview of Keysight solutions for the GaN model. Then, they introduce ASM/MVSG models and challenges in RF application. Lastly, they discuss models in IC-CAP and large signal simulation in PathWave ADS.

Компания Polar Instruments сообщила о выходе новой версии своего продукта Speedstack v22.09.01, которая включает модуль Structure View, обеспечивающий интерактивный просмотр параметров контролируемых структур в стеке слоев.

Новое видео на канале Altium Academy: How to Work with Annotation Tools | Altium Designer Draftsman Documents

Draftsman Documents provide annotation tools to convey physical properties such as tolerances and surface finish. Learn how to use these annotation tools in this Altium Designer Training Video.

Новое видео на канале Cadence PCB Design and Analysis: How to find and fix electrically overstressed components in your design | Allegro System Capture

Even if your PCB works as expected in the ideal design environment, it doesn't make it reliable enough. A designer must identify stress levels of components due to heat from excessive power dissipation, increased temperature, secondary breakdowns, or violations of voltage / current limits. With Allegro System Capture, you can easily simulate your entire design to determine if its components are stressed to exceed device limits due to current, voltage, or power.

Новое видео на канале EEsof AE Tips:ADS: Optimizing Across Multiple States

This video provides a demonstration of how to run optimizations across multiple states in ADS.

Новое видео на канале VIAS3D: Electronic Design Analysis with CST Studio Suite

Новое видео на канале EMA Design Automation: Topology Explorer: Design Setup for Topology Extraction in Sigrity Aurora 17.4

In this video, we’ll provide an in-depth explanation on Signal Integrity Analysis and Topology Extraction using the Topology Explorer in Sigrity Aurora .

Новое видео на канале remcomsoftware: Transient EM Circuit Co-Simulation

Новое видео на канале Synopsys: Creating High-Performance Embedded Apps with a Scalable Multiprocessor Architecture

This webinar will look at a new ARC multiprocessor cluster architecture that is highly scalable to achieve very high performance for storage, automotive, networking, mobile, and other high-end embedded applications.

Интересная статья: Резонаторная ячейка с открытым входом на основе диэлектрической пластины на металлической подложке

Возможность перевода энергии падающей электромагнитной волны в энергию поверхностной волны в плоской диэлектрической пластине на металлической подложке подтверждена на электродинамических моделях. Для передачи энергии между волнами разной структуры используется дифракционная решетка, помещаемая на поверхность пластины. Энергия удерживается в пластине путем образования резонатора поверхностной волны за счет введения не выступающих металлических стенок по торцам пластины. Таким образом, предложена резонаторная ячейка с открытым входом – энергия поступает в ячейку через всю освещенную поверхность пластины.

#FEKO

Новое видео на канале Altium Academy: How to Work with Dimensions in Draftsman Documents

Draftsman Documents provide dimensioning tools to capture and display the physical features of the product for fabrication and documentation. Learn how to use them in this Altium Designer Training Video.

Новое видео на канале ELM: Обзор нового численного метода Faceted UTD в Altair Feko

Новое видео на канале Cadence Design Systems: Easily Perform RF Analysis of RF IP Designed Using Virtuoso Design Platform in Microwave Office

Learn how you can accelerate your power amplifier (PA) design using a Virtuoso PDK with Tower Semiconductor's SiGE BiCMOS technology within the Microwave Office design environment.

Новое видео на канале Quadra Solutions Ltd: eCADSTAR Align Tutorial with Sarah Santangeli

In this video, we will be discussing how to align in eCADSTAR. You can follow the demonstration presented by Sarah Santeangeli our Application Engineer / PCB Designer.

Новое видео на канале Cadence Design Systems: Enabling Next-Generation Automotive Systems

The level of vehicle automation is the key driver for new E/E architectures, sensor architectures and high-bandwidth in-vehicle communication. Radar, Lidar and Camera are the key sensors as part of the new zonal architectures to enable autonomous driving.

Новое видео на канале MATLAB: Optimizing the Loop Filter in a Clock Recovery PLL

Dive deeper into the purpose of the loop filter in the clock recovery PLL. First, study the loop filter poles and zeros heuristically to see what purpose each serves: namely, referencing feedthrough attenuation, adding phase margin for stability, and maximizing open-loop gain. Learn how you can leverage Simulink Design Optimization™ to tune the three-loop gains for optimal step response performance using a phase domain PLL model.

Новое видео на канале remcomsoftware: Matching Network Design Updates in XFdtd

XFdtd is a full-wave antenna design and analysis tool that includes capability for matching network design. Matching network and corporate feed networks can be laid out in a schematic editor and solved with a frequency-domain circuit solver. This capability is integrated with full-wave results so users can see the impact of a matching network on far zone, efficiency, and other results. Once the matching network is laid out on the PCB, parasitics are considered by circuit element optimization (CEO) as it determines the final component values.

Новое видео на канале Phil's Lab: Extended Kalman Filter Software Implementation - Sensor Fusion #4 - Phil's Lab #73

Extended Kalman Filter (EKF) implementation and practical considerations. Real-world, real-time implementation and demo on an STM32 microcontroller in C using accelerometer and gyroscope measurements.

Новое видео на канале Cadence PCB Design and Analysis: Team Design for Large and Complex PCBs | Allegro PCB Designer

As we try to put everything on a single PCB, it results in a large and complex design. Completing such complex design in time while maintaining quality is a challenge and you might miss the deadline. With Allegro PCB Designer, you can easily partition the design so that multiple designers can work in parallel to accelerate the design cycle.

Новое видео на канале Anurag Bhargava: ADS2023 Top10 - Feature 7: SerDes Enhancements

Learn how ADS 2023 release can help you to increase your productivity & capability with the cool SerDes enhancements if you are working in High-Speed SerDes & link design applications.

Новое видео на канале Altium Academy: How to Add Additional Views in a Draftsman Document

Altium Designer’s Draftsman Document editor can help PCB designers use additional views in their documentation. Learn how to configure views including the component view, section view, detail view, isometric view, variants, legend for the layer stack, board region view, and the board realistic view.

Новое видео на канале Robert Feranec: Do You Really Need Power Planes? Are you sure? | Eric Bogatin

Новое видео на канале Keysight Design Software: Designing for Stability in High Frequency Circuits

Why should high-frequency circuit designers consider stability early on in the design process? In this webinar, Matt Ozalas from Keysight and Tom Winslow from Macom answer this question and introduces techniques to identify and solve stability problems in the design phase. They elaborate on a new way to simplify stability analysis using the WS-Probe and apply an example of the techniques applied to a real design.

Новое видео на канале Cadence Design Systems: Electrothermal Analysis of a MMIC Power Amplifier (PA) in QFN Package

Learn how the higher level of integration between Cadence AWR Microwave Office software and Celsius Thermal Solver provides electrothermal analysis of a MMIC PA in a QFN package on a PCB.

Новое видео на канале DipTrace: JLCPCB Basic Parts. DipTrace Feature Review

Интересная статья в блоге Coventor: How does Line Edge Roughness (LER) affect Semiconductor Performance at Advanced Nodes ?

Новое видео на канале MATLAB: Using a Single DFF for Phase Detection in clock and data recovery (CDR) loops

Take a closer look at how the simplest possible phase detector, a D Flip-Flop, works in clock and data recovery (CDR) loops. See an inside-out scheme where data becomes clock and clock becomes data.

Новое видео на канале EEsof AE Tips: ADS: How to Simulate ESD

This video provides an overview of how to simulate ESD-Circuits in PathWave ADS. Through this process, you’ll see how to use both PCB layout and schematic simulations for ESD applications.

Новое видео на канале Altium Academy: How to Speed Up PCB Outputs Using Outjob Files

Have you ever wanted to quickly generate outputs on your new projects? In this video, Tech Consultant Zach Peterson shows you how to do just that by reusing your Outjob or Draftsman files in Altium Designer.

Новое видео на канале Robert Feranec: NOT in the Copper! 3D Animation of a Signal Through a VIA | Yuriy Shlepnev

Новое видео на канале Anurag Bhargava: ADS2023 Top10 - Feature 6: Conducted and Radiated EMI

Complying with EMI standards is necessary for any system to be sold for specific applications but performing EMI simulations are not an easy job no matter what design tool you use that forces a lot of designers to rely on only measurements and then retro-fit the modifications in case of any problem that adds cost and delay the project schedules. Watch this video to understand how easy is to perform the otherwise complex Conducted and Radiated EMI analysis in ADS 2023…

Новое видео на канале EMA Design Automation: PCB SI Basics: Performing Simulation with Lossy Transmission Lines

In this video, you'll learn how to run a simulation for reflection using a lossy transmission line topology, add/remove components from a topology, change reference designators, perform waveform measurements, and generate reports in OrCAD PCB 17.4.

Вышла очередная версия трассировщика ELECTRA 8.62

Вышло очередное обновление системы моделирования EMPIRE XPU 8.1.3.

The new minor update 8.1.3 is now available. Many enhancements were integrated in the latest version. Please fill in the Free Demo form for your personal copy.

Новое видео на канале Keysight Design Software: Advances in Multi-Level Signaling from Automotive to Data Centers

Standards for multi-level signaling are ever changing, and PathWave ADS simulation can help keep up! In this webinar, Application Engineers Graham Riley and Luis Boluna discuss the history of multi-level signaling, the design challenges it poses, and how to prepare for design success and standards. Demos include PAM3, MIPI C-Phy, and PAM4 802.3 ADS simulations.

Новое видео на канале DipTrace: SPICE Models. DipTrace Feature Review

Новое видео на канале Cadence Design Systems: Modeling Physical Layout in RF System-Level Design with Cadence VSS Software

See the new capabilities of behavior modeling interconnects in Cadence AWR Visual System Simulator (VSS) RF/wireless communications and radar system design software.

Новое видео на канале Оркада: Вебинар №7 - Быстрое проектирование и оптимизация радиочастотных устройств.

Данный вебинар посвящен проектированию электронных систем для аэрокосмической и оборонной промышленности. Темой презентации является быстрое проектирование и оптимизация радиочастотных устройств с помощью инструмента µWave wizard.

Новое видео на канале Altium Academy: How to Display Draftsman Document Variants in Altium Designer

Altium Designer allows PCB Designers to use draftsman documents to display their board variants. Learn how to create a draftsman document and add variants to it so that they are correctly displayed and editable through the properties panel.

Новое видео на канале Anurag Bhargava: ADS2023 Top10 - Feature 5: Electro-Thermal Simulation Enhancements

Electro-Thermal is a multi-physics simulator and it becoming more & more relevant to modern-day design applications where not only higher power circuits are being designed but also component density is increasing. Watch this video to understand how some of the new features can help you to simulate your design much easier for improved productivity.

Новое видео на канале MATLAB: Introduction to Clock Recovery PLLs Using Simulink

Watch an introduction to modeling asynchronous clock domains in Simulink®. You will learn how to leverage a phase-locked loop (PLL) architecture to perform clock and data recovery (CDR).

Новое видео на канале Сергея Янкина: СВЧ-моделирование в COMSOL Multiphysics. Версия 6.0

Модуль «Радиочастоты» пакета COMSOL Multiphysics® предоставляет широкий спектр техник и инструментов для моделирования СВЧ-резонаторов, волноводов, фильтров, антенн, периодических решеток, беспроводной передачи энергии, э/м помех и наводок в печатных платах, а также любых классических СВЧ-процессов и явлений, связанных с распространением и рассеянием э/м волн в линейных, нелинейных и дисперсионных средах.

Вышла новая версия программного обеспечения версии RDSim 2022R1, предназначенного для полного электромагнитного моделирования трехмерных структур.

#hollywave #rdsim

Новое видео на канале Keysight Design Software: Designing Phased Arrays With Confidence

Phased array technologies have been used in Aerospace and Defense applications for several decades, with many phased arrays deployed around the world. In recent years, phased array technologies are being applied to commercial and satellite communication applications. A lack of confidence in the traditional approach of spending a lot of time perfecting the first cut design, often leads to a design proposal that is conservative and overdesigned. However, today’s design automation tools have matured so that one can arrive at a more confident design before building a hardware prototype.

Компания Remcom сообщила о расширении возможностей редактора схем своего продукта XFdtd 3D, нацеленных на согласование диплексных антенн.

Remcom announces expanded capabilities within its schematic editor in the latest release of XFdtd® 3D EM Simulation Software, including support for diplex matched antennas and new efficiencies aimed at streamlining antenna design workflows and shortening design cycles.

Новое видео на канале EMA Design Automation: PCB SI Basics: Performing Simulation with Lossless Transmission Lines

In this video, you'll learn how to run a simulation for reflection using a lossless transmission line topology, add/remove components from a topology, change reference designators, perform waveform measurements, and generate reports in OrCAD PCB 17.4. This is the fourth video in this 5-part series.

Новое видео на канале Cadence Design Systems: MMIC in QFN Package Co-Design with Cadence Clarity 3D FEM Solver

See how integrating the Cadence Clarity 3D Solver into the Cadence AWR Microwave Office software provides faster simulations with higher capacity. Demo covers designing a MMIC in a QFN package to get electrical results and a stacked die on an interposer board on a PCB.

Новое видео на канале DipTrace: DipTrace 4.3 with integrated SPICE Simulator and XML support in all modules

Новое видео на канале Altium Academy: How to Work with Variants and Output Documents in Altium Designer

Variants can be used with output files to keep track of all the variations within your design. We’ll show you how to export these files including a Smart PDF, and an outjob file with variants.

Новое видео на канале Оркада: Вебинар №6 - Оптимизация зоны действия РЛС и систем радиосвязи.

В рамках данного вебинара мы рассмотрим анализ и оптимизацию зоны обзора радиолокационных станций. Будут проведены две демонстрации - радиолокационного покрытия при наличии глушителей и беспроводной связи с дроном, который летает в городской местности.

Новое видео на канале Keysight Design Software: Real-World Scenario Modeling to Aerospace Defense

Aerospace systems are expensive. They need to be designed with real-world scenario modeling to survive. Today’s design automation tools have matured to enable a more certain design before building a hardware prototype, allowing designers to be more competitive when bidding for projects and committing to aggressive time-to-market schedules. Learn realistic scenario modeling for radar system designers, radar simulation using PathWave System Design, and the benefits of the connection between AGI's STK Simulation Software and PathWave System Design (SystemVue).

Новое видео на канале Phil's Lab: Design Review - Schematic & PCB - Phil's Lab #70

Second design review of series. Examining schematic and PCB design of a wireless keyboard adapter made using KiCad. Common errors, best practices, routing techniques, and so on discussed in brief.

Новое видео на канале Robert Feranec: Unexpected Currents On The Other Side Of GND Plane - You may be surprised | Yuriy Shlepnev

Новое видео на канале EMA Design Automation: PCB SI Basics: Understanding the SigXplorer User Interface

In this video, you'll learn about the user interface of SigXplorer and how to edit a topology within OrCAD PCB 17.4.

Новое видео на канале CST microwave studio Designing and Simulation: How to design metamaterial || Metasurface

Компания Новарм сообщила о выходе новой версии своего продукта DipTrace 4.3, которая включает интегрированный Spice вычислитель, а также поддерживает импорт и экспорт проектов в формате XML.

After several months of development our team is pleased to announce the launch of DipTrace 4.3 that incorporates some significant updates. In the Schematic Capture module you can now find an integrated Spice Simulator. This advanced tool will allow carrying out Small-signal AC, DC Transfer Function, Transient and Noise analysis to check the integrity of circuit design and verify its operation without leaving the DipTrace interface. New SPICE models have been added to facilitate the preparation for the simulation. Furthermore, import and export in a universally compatible XML format has been added to Schematic Capture and PCB Layout modules. This format is both machine and human readable, so it may facilitate easy project revision and editing. Also, on our users’ request we have added the possibility to use custom column titles when generating BOM and Pick&Place reports. And, as usual, we have fixed all the detected bugs.

Новое видео на канале Anurag Bhargava: ADS2023 Top10 - Feature 4: Parametric EM/Circuit Co-Simulation & optimization

Learn how to take parametric RFPro data to ADS Circuit Simulation for performing EM/Circuit Cosimulation & Co-optimization as well as Statistical Analysis which provides the EM accuracy with Circuit Simulation flexibility.

Новое видео на канале Оркада: Вебинар №5 - Проектирование с учетом помех электромагнитного излучения.

Данный вебинар посвящен рискам, возникающим в зависимости от местоположения источника электромагнитного излучения, и анализу электронных систем. В рамках презентации мы расскажем о компании Altair, а также познакомимся с анализом местоположения источника помех. В качестве примера рассмотрим сферы обороны и автомобилестроения.

Новое видео на канале Cadence Design Systems: PA Design with Cadence Virtuoso PDK in Microwave Office and Tower Semi’s SiGe BiCMOS Technologies

Learn how you can accelerate your power amplifier (PA) design using a Virtuoso PDK with Tower Semiconductor's SiGE BiCMOS technology within the Microwave Office design environment.

Новое видео на канале Altium Academy: How to Work with Different Types of Component Variations

Altium Designer allows designers to implement several different types of component variations. Learn the differences between fitted, modified parameters, not fitted, and alternate Part variations, as well as how to add and manage these variations for your design.

Новое видео на канале Keysight Design Software: Learn How to Design a 5G, 6G mmWave Beamforming System

The use of millimeter-wave (mmWave) frequency for 5G and 6G communication systems is a common topic in the research community, but mmWave does have its challenges. Beamforming techniques are beneficial, but controlling and optimizing beams is difficult. Analyzing them is even more so. This webinar will demonstrate a model-based phased array system design and simulation to characterize a beam pattern. It will analyze spherical coverage using an unprecedented three-dimensional composite radiation pattern display technique.

Интересная статья в блоге Coventor: How Can You Use a GDS Layout File to Quickly Create a Simulation Ready MEMS Model?

Новое видео на канале DipTrace: Highlight Colors. DipTrace Feature Review

Новое видео на канале Cadence PCB Design and Analysis: Optimize switching regulator design | PSpice

How to improve circuit performance without overshooting the budget. Between tolerance failings, bulk production, and last-minute component shifts, keeping track of it all to get your design to production is very difficult. With PSpice you can sort the components based on their effect on circuit performance. For the most critical parts, you can evaluate alternate values of tolerance and other component parameters to meet desired criteria and invest only in critical components.

Новое видео на канале Anurag Bhargava: ADS2023 Top10 - Feature 3: Design Cloud HPC for ADS Circuit & EM Simulations

Learn how to turbocharge your circuit and EM simulations with Design Cloud HPC capability in ADS 2023 so that you can Simulate More & Wait Less. The new feature allows you to leverage the internal compute cluster environment such as LSF, Grid Engine, etc as well as the internal or external cloud infrastructure.

Новое видео на канале IEEE Microwave Theory and Techniques Society: Steps Needed to Adoption of Magnetic Resonant Wireless Power Transfer based on AirFuel Standard.

Новое видео на канале Altium Academy: How to Add 3D Assemblies to a Multi-Board Project in Altium Designer

The next step in the multi-board design process is adding 3D PCB Assemblies. In this video, learn how to add them to your PCB design, as well as how to work with the Assembly Editor.

Новое видео на канале Keysight Design Software: Design a Smaller, Lighter, Faster SMPS

Power Electronics Product Manager Dr. Colin Warwick discusses trends in Switched-mode Power Supplies (SMPSs) and high speed design approaches.

Новое видео на канале Cadence Design Systems: Introduction to Electrothermal Analysis for RF Power Applications

Learn how you can run thermal analysis from within the Cadence AWR Microwave Office software’s user interface using the Celsius Thermal Solver. This integration provides ready access to high-capacity electrothermal analysis for design verification and signoff of large, densely populated RF/microwave systems and high-power amplifiers (HPAs).

Новое видео на канале DipTrace: Move/Rotate RefDes. DipTrace Feature Review

Вышла версия системы проектирования печатных плат Easy-PC v26.

Easy-PC extends its manufacturing reach even further in this years release with the introduction of the industry standard IPC-2581 output plus many new design rule checks (DRC) and design for manufacture (DFM) checks. The emphasis has been to introduce new features that provide more in-depth checks and verify your designs so that they are manufacture-ready at the final process.

Новое видео на канале Cadence PCB Design and Analysis: How to create fanout for BGA and QFN packages | Allegro PCB Designer

BGAs and other high-pin count devices requiring Fanouts for routing are common in PCBs nowadays. Fanout is a combination of a short trace and vias used to connect inner rows of pins on high pin count devices. Manually creating vias and traces is time-consuming and error-prone. With Allegro PCB Designer, it’s easy to create constraint-driven Fanouts for the symbol in one easy step.

Новое видео на канале IEEE Microwave Theory and Techniques Society: Fundamentals of mm-Wave and Sub-Terahertz Frequency Generation , Synthesis and Radiation

Новое видео на канале Anurag Bhargava: ADS2023 Top10 - Feature 2: RFPro Simulation Enhancements

Learn how the new & exciting feature of performing RFPro parameter sweep in ADS 2023 now covers custom 3D models, process variations as well as pCell parameters.

Новое видео на канале Altium Academy: How Does Sensitivity Analysis Work? | PCB Simulation

Sensitivity analysis is one PCB simulation method that explores applying specific deviations to components. But how does it work and how does it differ from Monte Carlo analysis and how can you run one of your own?

Интересная статья в блоге Coventor: 3D NAND Virtual Process Troubleshooting and Investigation with SEMulator3D

Новый PLM-компонент для Altium Designer от компании АППИУС обеспечивает полную автоматизацию этапа КПП

Специализированный компонент интеграции системы «Appius-PLM Управление жизненным циклом изделия» дает возможность приборостроительным предприятиям при использовании системы автоматизированного проектирования Altium Designer настроить сквозной обмен проектными данными и организовать безопасное единое хранилище для взаимодействия проектировщиков и разработчиков.

Интересная статья: Согласование малогабаритной планарной рамочной антенны, выполненной с использованием нового композитного материала, применительно для технологий 5G

Показана возможность применения мобильной антенны, реализованной на материале на основе фторированного этилен-пропилена в сочетании с гексаферитом стронция SrFe12O19, для современных систем связи пятого поколения, не исключая возможность ее работы в системах второго, третьего и четвертого поколения. Показаны преимущества применения композитных материалов при реализации антенных устройств в технологиях 5G. Произведено широкополосное согласование предложенной антенны с приемопередающим модулем в условиях возмущающих воздействий при ее работе в широком спектре естественных условий эксплуатации мобильного устройства.

Новое видео на канале IEEE Microwave Theory and Techniques Society: Confluence of Electromagnetics, Circuits and Systems enable The Third Wireless Revolution

Новое видео на канале Cadence PCB Design and Analysis: Derating Analysis for reliability of components | PSpice

How will you determine the behavior of components to non-ideal conditions like excessive power dissipation, raising current flow, or sudden increase in temperature? Your circuit design may fail due to overheating of components. With PSpice, you can easily measure the stress levels of components due to variation in power dissipation, temperature, overvoltage, and overcurrent.

Новое видео на канале Keysight Design Software: Reducing Electromagnetic Interference (EMI) in Switched-Mode Power Supplies

EMI noise in high speed switched-mode power converters can be examined by building a virtual prototype, then analyzing results using post-layout electromagnetic simulation techniques. Conducted & radiated EMI issues can be overcome using PathWave ADS Power Electronics, a common user environment of circuit simulation, layout, & field solvers.

Новое видео на канале IEEE Microwave Theory and Techniques Society: Implications for 5G, mm-wave and Related Applications

Новое видео на канале Anurag Bhargava: ADS2023 Top10 - Feature 1: DDS Enhancements

Have a look at the exciting data display enhancements in the ADS2023 release which will be very useful for all the designers and make daily life much easier.

Новое видео на канале Altium Academy: How to Mate Objects in Your Multi-board PCB's 3D Assembly

Altium Designer’s Multi-board Editor allows designers to mate PCBs to connect two separate objects, form axial connections, and create a whole assembly. Learn how to use the 3D Assembly to arrange and rotate objects, then mate them using the Mating Tool and the Mates Placement Mode.

Новое видео на канале IEEE Microwave Theory and Techniques Society: LiDAR for Autonomous Vehicles: The Principles, Market and Trends by Dr. Amarpal 'Paul' Khanna

Новое видео на канале Phil's Lab: USB High Speed Routing (ULPI, Delay Tuning) - Phil's Lab #67

Routing tips for USB High-Speed (HS) ULPI interfaces. Including guidlines on timing requirements, controlled impedance, package/via/trace delays, Altium tips, and more.

Новое видео на канале Cadence PCB Design and Analysis: Setup design rules in schematic for your design | Allegro System Capture

In a high-speed design, signals are transmitted at enormously higher speeds. This gives rise to multiple signal integrity issues like crosstalk, EMI, impedance mismatch, and more. PCB designers must layout their PCB according to high-speed design rules and guidelines. With Allegro System Capture, you can easily define Electrical design rules in your schematic for routing, which can be easily transferred to the layout.

Новое видео на канале Keysight Design Software: Designing an Award-Winning mmWave RFIC- Experiences and Insights

Learn from one of the designers of a transceiver for 802.11ad-based fixed wireless access and backhaul. This webinar is based on Erik Ojefors’ award-winning research paper, “A 57-71 GHz Beamforming SiGe Transceiver for 802.11ad-Based Fixed Wireless Access”, that was awarded the 2018 IEEE RFIC Best Industry Paper Award.

Новое видео на канале Altium Academy: Simbeor's 3D Field Solver with Yuriy Shlepnev-Electromagnetic Analysis

Our guest for today is Yuriy Shlepnev, the founder and president of Simberian. In this episode, he will tell us about Simbeor simulation capabilities, and briefly educate us on rise times, signal integrity, and solving EMI. He will also show us the simulator in action and how it can be a lifesaver to PCB designers like you.

Новое видео на канале IEEE Microwave Theory and Techniques Society: Building 5G and SATCOM Phased-Arrays and UAV-Detection Radars Using Low-Cost Silicon Technologies

Новое видео на канале Robert Feranec: Cool Projects Explained - FLEX PCBs, Robot, Motors and more | Carl Bugeja

Новое видео на канале EMA Design Automation: How To Set Up SI Design Wizard for Pre-Layout Simulation

In this video, you will learn how to identify supply nets, define stackups and constraints, and configure your design for pre-layout analysis using the SI Design Wizard in OrCAD PCB 17.4. This is the first video of this 5-part series.

Новое видео на канале SIMULIA: Planar Filter Models in CST Studio Suite

Новое видео на канале Phil's Lab: KiCad 6 and STM32 PCB Design Full Tutorial - Phil's Lab #65

Complete step-by-step PCB design process going through the schematic, layout, and routing of a 'black-pill' STM32-based PCB including USB in the *new* KiCAD 6. All the way from schematic creation, through to two-layer PCB layout and routing, as well as sending it off for manufacture and assembly via JLCPCB.

Новое видео на канале Siemens Software: HOW TO | How to suppress CAD geometry using expressions in Simcenter FLOEFD

Learn how to quickly suppress geometry for CFD studies on different geometrical model configurations. Simcenter FLOEFD is a fully CAD-embedded computational fluid dynamics (CFD) software so has robust CAD geometry and CAD operation support. Using expressions, users can quickly suppress CAD geometry as illustrated in this demonstration in Simcenter FLOEFD for NX.

Новое видео на канале Altair Academic Program: Learn 3D Maps with Altair WRAP

Новое видео на канале IEEE Microwave Theory and Techniques Society: Fundamentals of RF and mm-Wave Power Amplifier Design by Dr. Hua Wang

Интересная статья в MWJ: Solving Electromagnetic Densification at the Point of Design

Density, both informational and physical, determines complex RF system success or failure. Systems like 5G and Wi-Fi 7 pack more information into precious spectrum on smaller base stations, access points and devices. Finding density-related problems at prototyping, or later in deployment, adds cost and risk. Traditional RF electronic design automation (RF EDA) workflows are falling behind density challenges, analyzing one problem at a time and missing too much. A new approach: solving electromagnetic (EM) densification at the point of design.

Новое видео на канале Cadence PCB Design and Analysis: Cursor Operations | PSpice

Use the cursor to measure the difference between the crest and trough of an analog output waveform.

Новое видео на канале EEsof AE Tips: SystemVue: How to Add Your Own C++ Models

This video provides a detailed tutorial of how to create a new model in SystemVue using your own C++ code, including how to handle multiple-input/multiple-output models.

Новое видео на канале Altium Academy: What’s New in Altium 365 for June 2022: Library Health Dashboard, BOM Viewer and Conflict Prevention

Altium 365 continues to expand the platform’s functionality to best suit your needs. Now you can assess your library’s health at a glance with the Library Health dashboard, view and share your bill of materials (BOM) and view and download PDF documents, all in your web browser. We improved the existing diff and compare features, and released a new version of MCAD CoDesigner.

Новое видео на канале IEEE Microwave Theory and Techniques Society: Substrate Integrated Waveguide: Technology Towards 5G Applications by Maurizio Bozzi

Новое видео на канале ELM: Проектирование сверхширокополосных печатных антенн в Altair Feko 2022

Новое видео на канале Synopsys: In-Design Simulation - Partial Layout Extraction with Signoff Tools at Samsung Foundry

Новое видео на канале Keysight Design Software: PathWave Design 2022 RF and Microwave Circuit Design

Overcome RF and microwave design challenges with integrated software. Learn about RF Circuit and EM co-simulation RFPro integration with Ansys HFSS, Synopsis, and Mentor Faster simulations with the cloud HPC SimService . This webinar is geared toward RF design engineers working in commercial wireless. It addresses design challenges such as increased EM effects on circuit simulations due to mmWave frequencies and higher frequency bands with larger, modulated broadband data sets.

Новое видео на канале Altair Academic Program: Altair Global Contest for Students - 2022 - Second Training Webinar and Q&A

Новое видео на канале DipTrace: File Path Unification (Environment Variables). DipTrace Feature Review

Интересная статья в MWJ: Computational Electromagnetics Comparative Study of a 1 GHz, Stepped-Impedance Filter. A Tutorial on the Application of the Finite Element Method (FEM) Versus the Method of Moments (MoM)

This tutorial is a comparative study of two of the most common computational electromagnetics (CEM) solvers, FEM and MoM applied to a practical filter application. Both solvers are used to evaluate a 1 GHz, stepped-impedance, low-pass filter design. The filter design is described along with its ideal schematic results. A layout is generated and both electromagnetic solvers are applied. EM results of the two solvers are compared with the ideal schematic simulation and measurements. The CEM simulators reveal aspects missed by traditional schematic-based simulators. Insight into the differences between the two are discussed as well.

Новое видео на канале Altium Academy: How to Use Tools to Save Time in Altium Designer

Efficient selection tools have a massive impact on how clean your design can ultimately be, as well as how long it takes. Learn how to utilize the Edit Select Menu tools in Altium Designer to take control over your layout.

Новое видео на канале Cadence PCB Design and Analysis: Waveform and Plot Settings | PSpice

Configure waveform and plot settings to match your requirements when evaluating a circuit’s performance.

Новое видео на канале Евроинтех: IntelliSuite - Interoperability with Cadence CMOS MEMS

MEMS sensor and actuators are generally designed and simulated using 3D FEM simulation. In IntelliSuite it can also be designed using Element Based modelling. In this webinar, we will discuss how SYNPLE can be used to build a MEMS GYROSCOPE MODEL and simulate using element-based modelling technique from the netlist. The same model is used converted to 3D FEM Model for Multiphysics simulation on THERMOELECTROMECHANICAL (TEM). Further, the Multiphysics model is simulated to generate the Reduced Order Model (ROM). The FEM simulation is verified by performing Macromodel simulation on SYNPLE. The ROM file generated during reduced order model simulation can be converted to EDA compatible file (VerilogA) using EDA LINKER.

Компания Empyrean Technology анонсировала выход своего продукта Empyrean Patron, высокопроизводительной системы моделирования целостности питания на транзисторном уровне.

Новое видео на канале DipTrace: Differential Pair. DipTrace Feature Review

Новое видео на канале Keysight Design Software: Integrated 3D EMCircuit Co-Simulation Environment for First-Pass Design Win

MMIC/Module Design Flow Specialist Jack Sifri discusses industry trends in RF and Microwave design and introduces Advanced Design System's RFPro with a quick demo. He utilizes RFPro in the design and analysis of a PA/Switch Module and shares a hands-on workshop.

Интересная статья: Численное моделирование поведения намагниченности в одноосных магнитных пленках.

Численными методами в среде MuMAX3 проведен расчет полей насыщения и спектров резонансных частот намагниченности для тонкой магнитной пластины с анизотропией типа выделенная ось. Определены оптимальные параметры для моделирования авторезонансных процессов в пленках железоиттриевого граната. Изучена роль поверхностной анизотропии и диполь-дипольного взаимодействия в моделировании статической и динамической намагниченности в пленке.

Новое видео на канале Altium Academy: How to Use the Copy Room Tools in Altium Designer

Rooms allow you to use rules on specific areas of your design. This helps immensely with properly defining trace widths and hole sizes for specific components. Learn how easy it is to assign rules to specific rooms in the PCB and copy them to save time and maximize efficiency.

Новое видео на канале Modelithics: Modelithics Short Waves: Substrate Scaling Model Feature in Cadence AWR Design Environment.

This Modelithics Short Waves video quickly demonstrates the substrate scalability feature of Modelithics Microwave Global Models for RLC components within Cadence AWR Design Environment. Thanks to this feature, designers can choose a desired substrate and the model will then scale appropriately.

Новое видео на канале Altair Academic Program: Learn Radio and Radar Coverage with Altair WRAP

Новое видео на канале Cadence PCB Design and Analysis: How to create planes in PCB layout | Allegro PCB Designer

It is always preferable to create power and ground planes instead of routing traces, for intended PCB performance. It reduces electrical noise and EMI interference. With Allegro PCB Designer, you can easily create, copy and edit shapes on any required layers.

Интересная статья в MWJ: Improving System Simulation Accuracy with Measurement-based Behavioral Mode

With communication systems evolving quickly, the main challenge for manufacturers is to design intelligent, secure and energy-efficient systems. This development is driven by the traffic generated by the various uses of mobile communications and new associated applications, necessitating the frequent introduction of new technologies to meet these requirements. The arrival of the new 5G standard has brought a radical change in the architecture of base stations with the development of active antenna systems (AAS).

Новое видео на канале Keysight Design Software: Designing Wafer Level Chip Scale Packaging

Expert Matthew Ozalas provides a overview on wafer level packaging and lists the advantages and challenges. He then goes through two examples on the Keysight UXR Channel Module and the GLOBALFOUNDRIES ADK Integrated Phase Array on Package, and highlights the challenges of closing the gap on technology management, assembly, and EM based design. He introduces Keysight Technology Assembly and EM solution in a live demo as the way to solve these challenges.

Новое видео на канале Polar Instruments: Separating dc resistance from PCB trace characteristic impedance measurement.

Компания Эремекс сообщила о выходе новой версии своего продукта Delta Design 3.6

Новое видео на канале Евроинтех: IntelliSuite - Complete MEMS Solutions IntelliSuite

IntelliSuite is a complete MEMS simulation package. Explore the novel features to perform Clean Room Simulation, Multiphysics (FEM Simulation) and system level simulation (element-based modelling, Reduced order model simulation and MEMS+ IC) in the latest version.

Новое видео на канале Altium Academy: How to Set Up a Crosstalk Demo | PCB Layout

Have you ever wondered how to run crosstalk simulations in Altium Designer? In this video, Technical Consultant Zach Peterson details how to assign victim and aggressor nets, how to explore crosstalk between groups, and more.

Новое видео на канале Eremex DD: Цифровое моделирование в САПР Delta Design

Интересная статья в блоге Siemens: Shock response: Designing for the full spectrum

Новое видео на канале DipTrace: Renew Layout from Schematic. Related Schematic (by hidden IDs). DipTrace Feature Review

Новое видео на канале Keysight Design Software: ADS Electro-Thermal Simulation: Everything High Frequency Circuit Designers Need to Know About Stability Analysis

High-frequency circuit designers often struggle with stability. Learn techniques to identify and solve stability problems in the design phase before they become headaches in the lab. Classical methodologies will be discussed, and a unique approach will be introduced using a new bidirectional impedance probe in PathWave Advanced Design System (ADS) called the “Winslow Probe”.

Новое видео на канале Cadence PCB Design and Analysis:How to generate different types PCB design reports | Allegro PCB Designer

Reports play an important role in tracking progress and planning which improves decision-making overall. With Allegro PCB Designer you can easily generate reports about everything in your design from vias to Gerber.

Новое видео на канале Altium Academy: How to Perform a Monte Carlo Simulation in Altium Designer

In our previous video, Tech Consultant Zach Peterson explored component tolerances. Today, Zach uses a Monte Carlo simulation to explore how things like component tolerances impact the performance of your circuits. Open up your copy of Altium Designer and follow along.

Новое видео на канале EEsof AE Tips: MBP: Introduction to MBP Model Extraction with Demo of the Task Tree Method

This video introduces MBP, the User Interface, applications and describes three methods of extracting a model 1) Manual Method 2) Task Tree Extraction and 3) Extraction Script. It also demos the second Task Tree Extraction method of extracting a BSIM3 SOI model – b3soi.

Английская компания WestDev, специализирующаяся на разработке систем проектирования печатных плат, сообщила о выходе новой версии ее продукта Pulsonix v12.

Новое видео на канале Евроинтех: IntelliSuite - Advancements in IntelliSuite

There has been significant advancement in the latest version of IntelliSuite software. Explore the new features to perform MEMS Clean Room Simulation, Multiphysics (FEM Simulation) and system level simulation (element-based modelling, Reduced order model simulation and MEMS+ IC) in the latest version.

Новое видео на канале DipTrace: Renew Layout from Schematic. By RefDes. DipTrace Feature Review

Новое видео на канале Cadence Design Systems: Accelerate Time to Market for Power Integrity Signoff

Learn how you can achieve productivity gains using the Voltus-XFi Custom Power Integrity solution, a custom electromigration and IR drop (EM-IR) solution that delivers improved ease of use with minimal tuning and enables the development of efficient, low-power ICs. See a step-by-step demonstration of its central cockpit and intuitive EM-IR results browser. Its seamless integration with the Cadence Virtuoso and Spectre platforms enables accurate and fast EM-IR analysis.

Новое видео на канале Keysight Design Software: ADS Electro-Thermal Simulation: Avoid Performance and Reliability Issues in Your Next IC Design

The PathWave ADS Electro-Thermal Analysis Solution provides accurate, temperature aware IC simulation results by using device temperatures that take into account thermal coupling, and thermal characteristics of the package. Additionally, PathWave ADS provides a Floorplanner layout-only thermal simulator, which allows designers to extract a 3D temperature profile of any layout, without the need for a schematic.

Новое видео на канале Cadence PCB Design and Analysis: How to reuse known good designs | Allegro System Capture

It’s a complete waste of time and effort if we are recreating similar circuit designs again and again. Instead, we should find an easy way to reuse known good designs. Allegro System Capture provides an easy solution to create design blocks which can be reused in schematics as well as in PCB layout as modules.

Новое видео на канале ELM: Анализ целостности сигналов в Altair PollEx PCB

Интересная статья: Объемное моделирование СВЧ-нагревателя жидкости.

Данная работа посвящена моделированию поглощения энергии электромагнитного поля СВЧ в устройстве для пастеризации молока. С применением САПР FEKO построена 3D-модель устройства и выполнено моделирование его работы. Проведено исследование влияние угла наклона кварцевых трубок на распределение электромагнитного поля в волноводе. Также рассмотрено влияние диаметра и материала трубок. Получены распределения электрического поля и удельной мощности, поглощенной на кг диэлектрика в волноводе. Выполнена оценка точности результатов.

Новое видео на канале Altium Academy: How and When to Use Rooms in Altium Designer

Rooms are an extremely valuable tool within the Altium Designer PCB environment, but how and when do you use them? Learn how rooms allow you to control component placement and layout, assign design rules to groups of items, repeat similar layouts in your multichannel design, and more.

Новое видео на канале EMA Design Automation: How to Netlist a Design

Инрересная статья на сайте Remcom: Assessing 5G Radar Altimeter Interference for Realistic Instrument Landing System Approaches

In this whitepaper we use Remcom’s Wireless InSite 3D Wireless Prediction Software to simulate the level of interference received at the radar altimeter input port of a landing aircraft due to emissions from 5G base stations which are in the vicinity of the approach to runway 27L at Chicago O’Hare International Airport. This example scenario was chosen as it was considered in the report prepared by the 5G Task Force of the Radio Technical Commission for Aeronautics (RTCA) to evaluate radar altimeter safety concerns.

Новое видео на канале MATLAB: SPICE to Simscape: Common-Emitter Amplifier

Learn how to convert a SPICE netlist of a common-emitter amplifier to a Simscape™ block. This allows users to exercise their SPICE design in Simulink® without manually re-entering the schematic. The key function in the process is subcircuit2ssc from Simscape Electrical™.

Новое видео на канале Altium Russia: Почему выгодно делать релиз?

В продолжение первого вебинара, мы попробуем разобраться, какие возможности дает нам релиз проекта, и почему выгодно не пропускать этот важный этап проектирования.

Новое видео на канале Keysight Design Software: Simulate More Wait Less: Cloud HPC for Pathwave ADS

Join us for a look at Keysight’s new Design Cloud user-experience for Electromagnetic Simulations in PathWave ADS 2021. In this webinar you will learn about the workflow, benefits, and performance expectations for a selection of RF/uW and Signal Integrity application examples. Furthermore, you will be introduced to our turn-key cloud solution partners, Nimbix, where you will see a live demonstration of PathWave ADS 2021 provisioning hardware on-the-fly on the Nimbix JARVICE platform.

Новое видео на канале DipTrace: Renew Layout from Schematic. By Components (by hidden IDs). DipTrace Feature Review

Компания Coventor сообщила о выходе очередного обновления своих продуктов для проектирования MEMS устройств. We are pleased to announce the release of CoventorMP 2.1, which includes MEMS+ 7.1 and CoventorWare 11.1. New features streamline device creation and make simulation results easier to load and view.

Новое видео на канале CST microwave studio Designing and Simulation: Ultrawideband Cross-Polarization Converter Using Anisotropic Reflective Metasurface

Новое видео на канале Cadence PCB Design and Analysis: How to create precise and accurate manufacturing data using IPC2581 | Allegro PCB Designer

Manufacturing data should be very precise and accurate for PCB fabrication process. Transferring multiple files of manufacturing data is tedious and may result in missing data. With Allegro PCB Designer it’s easy to share manufacturing data in a single file using IPC2581 export.

Новое видео на канале VIAS3D: Using Multi Physics Simulation for Successful Satellite Launches

Новое видео на канале EMA Design Automation: How to Expedite PSpice Analysis with Saved Measurements

Компания CENOS анонсировала новую версию своего продукта RF 2.0, который является полностью переработанной версией пакета CENOS Antenna Design application.

Новое видео на канале Altium Academy: How to Use Rooms for Component Placement in Altium Designer

Rooms give PCB designers more control over how and where their components are placed in the PCB. Learn how to use room properties to limit what is allowed in and out of a room with the room definition and custom queries.

Новое видео на канале MATLAB: Accelerate GT-Power to Simulink Model Order Reduction on the Cloud

Новое видео на канале Robert Feranec: Which length matching is the best? You may be surprised … | Eric Bogatin

Новое видео на канале Keysight Design Software: Robust Design Workflow for Signal Integrity

This webinar introduces a robust PCB design workflow that facilitates efficient signal integrity analysis and troubleshooting. Dr. Tim Wang Lee shares his insights into the mechanisms that affect signal integrity and provides practical tips for evaluating link designs and troubleshooting issues.

Новое видео на канале Keysight Design Software: How to Design an RF Power Amplifier: The Basics

This video will provide a foundation for understanding how power amplifier circuits work. If you are new to High-Frequency Power Amplifier Circuit Design, this is the place to start. If you are an experienced designer, this video will provide unique insights in the fundamentals that you may not have seen before. Questions which will be answered include: what is AC power?, how is ac power generated and dissipated?, what topologies are convenient to use for power amplifier circuits? what is a loadline and how can this be used to design a power amplifier?

Новое видео на канале Cadence PCB Design and Analysis: How to create Hierarchical blocks | Allegro System Capture

Sometimes a similar circuit is used multiple times in the same schematic as well as in other projects. Copying the complete circuit again and again can be tedious as well as error prone. With Allegro System Capture, you can easily create reusable blocks which makes design access easier and can be used anywhere in the same design as well as in other designs.

Новое видео на канале Micro Talks: How to install CENOS antenna design software 2022

This video will help you to install this latest antenna design software with license for 10 days free trial. CENOS Electromagnetics simulation software is free for academic, non-commercial use, with mandatory software name attribution in research related materials.

Новое видео на канале Ansys Photonics: Statistical Simulation for Process Variations During Component Design

Новое видео на канале DipTrace: Connecting GND Pad to Inner Layer. DipTrace Feature Review

Новое видео на канале Keysight Design Software: PathWave Design 2022 High Speed Digital Design

This webinar was part of the PathWave Design 2022 High-Speed Digital Launch Event. Our experts discuss the evolution of the electronics design workflow, provide insight on the future of DDR5 Memory, explain the rigorous design of a DDR4 system, and introduce PathWave ADS 2022.

Новое видео на канале Altium Academy: How to Use Via Shielding and Stitching Tools in Altium Designer

Altium Designer allows full control over via shielding and stitching. In this video, learn how to use our shielding and stitching tools, how to alter their parameters, and how to remove any unwanted via shielding and stitching.

Новое видео на канале Cadence PCB Design and Analysis: Documentation for PCB manufacturing | Allegro PCB Designer

PCB design documentation plays an important role in fabrication. Your design is a total waste if you can’t convey your design intentions to the manufacturer. With Allegro PCB Designer you can easily document all the fabrication information like BOM, component assembly, fabrication notes and more.

Компания Downstream Technologies сообщила о выходе новых версии своих продуктов CAM350 version 14.6 и BluePrint-PCB version 6.6.

Новое видео на канале MATLAB: High-speed Radar and 5G NR GSPS Processing on FPGAs and SoCs

Компания TICRA анонсировала новую версию своего продукта TICRA Tools 22.0. Новые функции реализованы в продуктах: GRASP, ESTEAM, POS, CHAMP 3D и QUPES.

Вышла очередная версия KiCad 6.0.6. The KiCad project is proud to announce the latest series 6 stable release. The 6.0.6 stable version contains critical bug fixes and other minor improvements since the previous release.

Новое видео на канале DipTrace: Circular Board. DipTrace Feature Review

Новое видео на канале Keysight Design Software: How to Find the Elusive Dynamic Switching Current of Your FPGA Power Rail

Lower operating voltages and higher currents are making power supply margining an increasingly critical part of product development. A complete assessment of the power supply performance must include the voltage and current delivery to the load. Measuring the voltage at a field-programmable gate array (FPGA) load is not too difficult. However, current measurement at the load is not possible because of the distributed nature of the current connecting to a multipin FPGA load. Learn how PathWave ADS simulation, combined with the Infiniium oscilloscope measurement of dynamic voltage across the power delivery network (PDN), can synthesize the dynamic current at the FPGA.

Новое видео на канале HFSS_for_RF_Application: Automatic Lumped and Wave Port creation in Ansys HFSS

Новое видео на канале Altium Academy: How to Use 3D Body Features for Precise Component Creation

The ability to easily conceptualize components in three dimensions dramatically increases design precision. Learn how to quickly and accurately place 3D models of components on their footprints as well as how to work with snap points in 3D mode.

Новое видео на канале Cadence PCB Design and Analysis: Gerber data for PCB fabrication | Allegro PCB Designer

After completing PCB design and analysis, the next critical step is to prepare the design files for manufacturing. The gerber files consist of layer stackup, layer films, masking data, BOM, drilling information, pick and place and more zipped into a single file. The manufacturer requires this information to create required patterns, circuits, and component assembly. With Allegro PCB Designer, you can easily generate Gerber using Artwork feature.

Новое видео на канале MATLAB: Implement Droop Controllers for Islanded Operation of Remote Microgrids

Новое видео на канале ELM: DFA анализ печатной платы в Altair PollEx

Новое видео на канале Keysight Design Software: New Technologies for Signal and Power Integrity Simulation in PathWave ADS 2021

Signal and Power Integrity simulations are essential to detect issues early in the design cycle to avoid costly rework. In this webinar, our experts introduce new technologies in PathWave ADS 2021 and the importance of these technologies in simulation. Topics include SIPro RapidScan Z0, Via Designer, Power Integrity Workflow with PIPro, E-O-E Solution, and Memory Designer.

Новое видео на канале Robert Feranec: Is This The Best Antenna Design And Simulation Software? | Markus Laudien

Новое видео на канале Altium Academy: How to Auto-Calculate Impedance on Single-Ended Transmission Lines

Новое видео на канале HFSS_for_RF_Application: Creating STL using Ansys SpaceClaim

Новое видео на канале DipTrace: Remove Ratline while Deleting Trace. DipTrace Feature Review

Новое видео на канале Cadence PCB Design and Analysis: How to reuse DEHDL designs in Allegro System Capture | Allegro System Capture

Changing the design tool is always not a wishful task because you have a huge database of existing designs. With Allegro System Capture, it’s easy to import known good DE-HDL designs and reuse them in your next design without reinventing the wheel.

Новое видео на канале Sigasi: VHDL 2019 Conditional Analysis

VHDL 2019 improves many aspects of the popular hardware design language. One of the novel features it brings is Conditional Analysis - a simplified version of the preprocessor found in SystemVerilog or C languages. The Sigasi Studio 4.16 release offers full support for VHDL Conditional Analysis.

Компания Altair съела фирму Concept Engineering, специализирующуюся на разработке средств визуализации для разработки электроники.

Новое видео на канале Altium Academy: Create a new ECAD enterprise project while connected to PLM

Новое видео на канале Keysight Design Software: Delivering Quiet Power to Automotive Electronics

Automotive electronics running at gigabit data rates and supporting 5G communications cannot neglect the importance of quiet power delivery. Engineers need to know how to use power integrity simulations and measurements during the design phase to reduce power rail noise and avoid EMI failures. Selection of components and placement on the power distribution network can all be modeled and optimized for improving noise margins and avoiding expensive hardware re-spins.

Новое видео на канале Robert Feranec: Things on your boards causing problems during manufacturing | Amit Bahl

Новое видео на канале EMA Design Automation: How to Assign Manufacturer's Spice Models in OrCAD PSpice

Новое видео на канале DipTrace: Pattern Generator. QFN. DipTrace Feature Review

Новое видео на канале Ansys Photonics: FDTD & EME Performance Parameters as Results

Новое видео на канале Altium Russia: Не пропускайте важный этап проектирования

В рамках вебинара Вы узнаете о еще одном очень важном этапе проектирования, который не следует пропускать - это релиз проекта! Мы разберемся, что такое релиз и зачем он нужен, узнаем, как подготовить проект к релизу, и через какие этапы он будет проходить в ходе выпуска.

Новое видео на канале Cadence PCB Design and Analysis: How to create bends in flex PCB design | OrCAD PCB Designer

Flexible circuits are increasingly common as you try and fit more in less space and strive to reduce EMI/EMC. Along with defining a different stackup and materials for the flexible part of your design, specifying the bend details accurately communicates to manufacturing where the bending and flexing should occur. With OrCAD, its easy to create bendable areas in your rigid flex design to fit your final product

Новое видео на канале Maya HTT: Session 4: Hands-on Simulation – Frontloading CFD with Simcenter FLOEFD – EV Engineering

Прикладная записка с сайта AWR ныне Cadence: Design of a 10GHz LNA for Amateur Radio Operation Using AWR Software.

Новое видео на канале ELM: DFM анализ печатной платы в Altair PollEx PCB

Новое видео на канале Altium Academy: Measuring in the PCB | How To Use Altium Designer

With spacing being such a critical aspect of PCB Design, fine-grained control over how you measure object distances is crucial. Learn how to utilize the measure distance and measure selected objects commands in Altium Designer, as well as how to measure tracks and the faces of 3D bodies.

Новое видео на канале simbeor: Machine Learning Design Space Exploration for Signal Integrity Analysis of 112Gb Systems (ECTC2021)

This presentation from ECTC2021 outlines a systematic approach for system design space exploration through the application of machine learning (ML) methods for advanced system analysis. A demonstration of applying this method for signal integrity analysis, and a case study of 112Gb SerDes systems analysis based on Channel Operating Margin (COM) simulation methodology, are provided.

Новое видео на канале Ansys Photonics: CML Compiler Thermal Switch Model

Новое видео на канале Сергея Янкина: Расчёт ферритового циркулятора в COMSOL Multiphysics

Фрагмент архивного вебинара, в котором демонстрируется сборка ферритового СВЧ-циркулятора. Особый интерес представляет ручная настройка модели материала для феррита, а также пример использования инструментов оптимизиции.

Новое видео на канале MATLAB: Simulating Switched-Mode Power Supply | Developing Electrical Systems - Part 2

Learn how to model and simulate a switched-mode power supply that is generally used for laptop or mobile phone chargers. Using Simulink® and Simscape Electrical™, MathWorks engineers will show how to develop, simulate, and tune a controller that maintains desired output voltage in the presence of input voltage variations and load changes to achieve a fast and stable response.

Новое видео на канале DipTrace: Show Vias by Style. DipTrace Feature Review

Новое видео на канале Cadence PCB Design and Analysis: How to predict placement violations earlier in design cycle | OrCAD PCB Designer

Most of the DRC checks are applicable after or during routing, which require modification in component placement, and it increases the time to complete the design. With OrCAD you can easily determine violations while placing the components in your design.

Новое видео на канале Keysight Design Software: Pulse Radar Analysis Seminar - Keysight World 2020

Новое видео на канале Сергея Янкина: Анализ спектра отклика на ударное воздействие в COMSOL Multiphysics

Данный видеоурок посвящен разбору некоторых инструментов для проведения вибрационного анализа и, в частности, исследованию отклика механического элемента - материнской платы - на ударное воздействие. В рамках него мы сравниваем стандартную методику через пошаговое моделирование и отслеживание изменений во времени (Time-Stepping Analysis) и новый для COMSOL Multiphysics® подход на основании анализа спектра отклика (Response Spectrum Analysis), предустановленная конфигурация которого появилась в релизе 5.4.

Видео также содержит подробные инструкции о проведении исследования на собственные частоты, в т.ч. с анализом коэффициентов участия и модальных масс, и настройке конечно-элементных сеток для подобных задач.

Новое видео на канале PCSCHEMATIC: How to route wires in a panel with Panel router - an integrated feature in PCSCHEMATIC Automation

This video shows you how to route wires in a panel with Panelrouter - an integrated feature in PCSCHEMATIC Automation. Panelrouter helps you to make automatic routing of wires in panels. Based on the electrical connections in the diagrams, the Panelrouter finds the shortest wirepaths.

Новое видео на канале simbeor: Evaluation of S-Parameters Similarity with Modified Hausdorff Distance (presentation from EPEPS2021)

A new similarity measure for two sets of S-parameters is proposed. It is constructed with the modified Hausdorff distance applied to S-parameter points in 3D space with real, imaginary and normalized frequency axes. New S-parameters similarity measure facilitates automation of the analysis to measurement validation, comparison of models and measurements obtained with different tools, as well as finding similar S-parameter models or similar elements within S-matrices.

Новое видео на канале EMA Design Automation: How to Install and Use the Free Trial of Ultra Librarian for OrCAD

Learn how to install your free trial of Ultra Librarian for OrCAD as well as how to browse, search, and add verified components directly within OrCAD Capture.

Новое видео на канале MATLAB: Introduction to Electrical System Modeling with Simscape Electrical | Part 1

Explore the essentials of Simscape Electrical™ and how to model electrical systems with it. An electrical power system with a three-phase circuit and AC/DC converter is developed to demonstrate some essential capabilities of Simscape Electrical for modeling and simulation. You will see how to parametrize the electrical components, change the model fidelity for design requirements, choose the right solver, and leverage Simscape Electrical and Simulink® for electrical power system control design and system-level simulation.

Новое видео на канале Altium Academy: How to Create Differential Pairs in the Schematic | Altium Designer

Новое видео на канале Synopsys: Design And Verify State-of-the-Art RFIC's using Synopsys Custom Design Family of Products

Новое видео на канале Cadence PCB Design and Analysis: Setting manufacturing rules in your PCB using DFM wizard | Allegro PCB Designer

Even if your PCB design passes all electrical and physical checks, it doesn't make it manufacturable unless it passes DFM checks. With Allegro PCB Designer, easily setup the DFM checks in the constraint manager for PCB assembly and fabrication.

Новое видео на канале DipTrace: Show Holes by Size. DipTrace Feature Review

Новое видео на канале IEEE Microwave Theory and Techniques Society: Silicon-Based Millimeter-Wave Phased Arrays for 5G by Bodhisatwa Sadhu

5G cellular communications use millimeter-wave phased arrays to achieve high data rates and low latency. The majority of the 5G millimeter-wave infrastructure will be partially or completely based on silicon technology. This talk will discuss key aspects of silicon-based millimeter-wave phased-array module design and characterization. It will cover fundamentals of phased arrays, provide an overview of phased array antenna modules using silicon technology, and take a deep dive into an example 5G phased array antenna module. The talk will end with a peek into the future of 5G directional communications.

Новое видео на канале simbeor: Simbeor 2022: Consistent Interconnect Signal Integrity Compliance Analysis from ERC to 3D EM

New Simbeor SI Compliance Analyzer™ tool for post-layout interconnect signal integrity compliance analysis is demonstrated at this session. SI Compliance Analyzer™ provides unified and easy to use interface to find violations of signal integrity with simulation-based electrical rule checking (ERC mode) and basic signal integrity analysis with either fast (Fast SI mode) or 3D EM models (3D SI mode). The demo begins with comprehensive reference integrity and impedance continuity analysis in the ERC mode, proceeds with the losses control compliance metrics in Fast SI and 3D SI modes and finishes with the demonstration of crosstalk noise control in ERC and 3D SI modes.

Новое видео на канале Altium Academy: Mapping out Components: Creating a Schematic Symbol in Altium Designer

When creating a schematic symbol, one of your first tasks will be creating a component symbol. Learn how to map out a component in the Schematic Library Editor by creating and configuring the component, adding pins, and creating graphics.

Новое видео на канале EMA Design Automation: OrCAD PSpice Designer Overview

Новое видео на канале Cadence PCB Design and Analysis: PCB Documentation for manufacturing | OrCAD PCB Designer

All your efforts in designing a perfect PCB are in vain if you can’t communicate the exact design details to your manufacturer. Providing accurate component placement and mounting details to the manufacturer is essential for PCB manufacturing. With OrCAD, it’s easy to create PCB documentation that can be shared with your manufacturer.

Новое видео на канале HFSS_for_RF_Application: Optimization workflow for Antenna in Ansys HFSS

Новое видео на канале Сергея Янкина: Нагрев сосредоточенного элемента на печатной плате в COMSOL Multiphysics

В данном видео рассмотрена концептуальная модель расчета сопряженного нагрева резистора на печатной плате. Резистор в электрической модели описан как сосредоточенный элемент через интерфейс Electrical Circuit, но при этом реализована ручная связка для учета нагрева системы за счет рассеиваемой на этом элементе мощности. Тонкие проводящие элементы модели описаны с использованием технологии Layered Shell. Их резистивный нагрев остальных описывается через готовые инструменты и мультифизические связки. В качестве обратной связи учитывается зависимость проводимости или сопротивления элементов от температуры.

В рамках сборки модели также показаны некоторые эффективные техники построения геометрии, сетки, настройки солверов и визуализации результатов.

Новое видео на канале MATLAB: How to use XY Visualization in Simulink

XY plot tool in Simulink Data Inspector helps you to plot and visualize data from multiple simulations. In this video, you will learn to plot multiple simulation outputs with different parameters on an XY plot and use the replay options to analyze relationships among plotted signals.

Новое видео на канале Altium Academy: How to Use 3D View Mode in Altium Designer | PCB Design for Beginners

Новое видео на канале EMA Design Automation: OrCAD PSpice Designer Plus Overview

Новое видео на канале Ansys Photonics: Cadence Virtuoso Layout Import GUI

Новое видео на канале Cadence PCB Design and Analysis: How to track changes in your design | Allegro System Capture

Today’s electronic designs are a combination of analog, mixed-signal, and RF circuits requiring tight collaboration with many teams. It's required to track every individual change and prevent data loss. With version control in Allegro System Capture, you can easily collaborate with other PCB designers keeping the track of changes from each contributor.

Новое видео на канале Siemens PCB Design: Design Reuse Enhancements

Layout design reuse has been enhanced to now include publishing of circuits within the layout environment. This gives you the ability to create circuits used multiple times in the design, protect it from editing, and provide notification and updating if the master source circuit is changed.

Новое видео на канале Altium Academy: Getting Started in Altium Designer and Altium 365 - Part 2 - Altium Designer Overview

Компания Aldec сообщила, что ее продукт Riviera-PRO, начиная с версии v2022.04, поддерживает Open Component Portability Infrastructure (OpenCPI).

Новое видео на канале Synopsys: Synopsys USB4 PHY Silicon Correlation with Keysight ADS Simulation

Новое видео на канале Siemens PCB Design: New in HyperLynx Advanced Solvers

It's easier than ever to visualize, examine and edit rigid-flex designs directly in the solver GUI. 3D Explorer includes a new solder ball breakout template that speeds the process of optimizing breakout patterns for large devices. Full-wave solver now provides power density animation plots that show how a structure conducts, reflects, or scatters energy.

Новое видео на канале Сергея Янкина: Полноволновые расчёты масштабных оптических систем в COMSOL с помощью технологии Beam Envelopes

В видеоуроке мы представим данный интерфейс и доступные в нем инструменты, обсудим рекомендуемые техники настройки моделей, построения сетки и проведения постобработки. Кроме того, мы проведем обзор актуальных примеров его использования, а сборку некоторых из них рассмотрим в рамках пошаговой демонстрации.

Новое видео на канале DipTrace: Layer Stackup. DipTrace Feature Review

Новое видео на канале Altium Russia: Лучший способ согласовать печатную плату

Современные печатные платы должны удовлетворять множеству требований от специалистов различных областей - это и схемотехник, и механик, и технолог. Важный аспект процесса проектирования - коммуникация с коллегами. Будучи на связи и оперативно отрабатывая те или иные замечания коллег, инженер-тополог повышает свою эффективность и более качественно делает свою работу. Вот почему важно иметь современные, продвинутые инструменты, позволяющие рецензировать проект всем участникам процесса разработки. На вебинаре рассмотрен функционал Altium Designer, покрывающий данные потребности.

Новое видео на канале EDA Direct: StarVision StarVision PRO Quick Start Video #3 Basic Design Navigation

This is a short video showing you how to do basic navigation of a design in StarVision PRO, set up viewing preferences, locate components/modules by drag and drop function while cross-probing between schematic and source code.

Новое видео на канале Cadence PCB Design and Analysis: How to define spacing and trace widths in your PCB design | Allegro PCB Designer

Интересная статья: Обойдемся без Siemens

Ведущие российские разработчики систем автоматизированного проектирования определились со стратегией своего развития в новых условиях и решили, что надо ускориться и рассчитывать только на себя

Новое видео на канале ELM: Проектирование и оптимизация микрополоскового СВЧ фильтра в Altair Feko 2022

Новое видео на канале CST microwave studio Designing and Simulation: Circular polarized Metasurface -Metamaterial

Новое видео на канале HFSS_for_RF_Application: Automatic Phase Centre calculation in Ansys HFSS

Новое видео на канале Altium Academy: Stackup Presets and Templates in Altium Designer | PCB Layout

Компания Polar Instruments обновила библиотеки материалов Speedstack, добавив туда ядра и препреги Shengyi AutoLad1, S1000H, S1000-2M, S1000-2, S1150G, S1141, S1170G core и AutoLad1B, S1000HB, S1000-2MB, S1000-2B, S1150GB, S0401, S1170GB. Обновленные библиотеки доступны для версии Speedstack v22.01 и выше.

Новое видео на канале Cadence PCB Design and Analysis: Transmission delay of bus signals | OrCAD PCB Designer

When routing a bus or a group of specific signals, you need to maintain similar etch length for all the signals in the group. Any difference in the transmission time of signals in a group may result in data loss. With OrCAD, you can easily resolve length issues by defining total etch length and propagation delay for your signals.

Новое видео на канале Сергея Янкина: Моделирование электромагнитного нагрева в COMSOL Multiphysics

Нагрев электронных компонентов при работе – это одна из основных мультифизических постановок, с которой работают инженеры и исследователи, занимающиеся электродинамическими расчетами.

Новое видео на канале DipTrace: Follow Rules. DipTrace Feature Review

Новое видео на канале Altium Academy: Getting Started in Altium Designer and Altium 365 - Part 1 - Installing and Licensing

Learn the basics of Altium Designer with our Getting Started in Altium Designer and Altium 365 series. In part 1, we’ll show you how to install Altium Designer, activate your Altium License, and show you the Altium 365 web interface. Let’s get started!

Новое видео на канале Anurag Bhargava: RFPro-22: RFPro-23: Solder Balls in RFPro - 3 Techniques

Modeling Solder Balls accurately might be critical for high-frequency characterization for your multi-technology assembly analysis to get as close to measurement as possible. This becomes even more important if you deal with mmW design applications. Watch this short tutorial to understand how easy it is to use Solder Balls in ADS/RFPro and perform a full 3D EM analysis in RFPro.

Новое видео на канале Robert Feranec: Altium - How To Do Versioning And Releases | Explained | Michal Faruga

Новое видео на канале Cadence PCB Design and Analysis: PCB Team Design Overview | Allegro PCB Designer

Новое видео на канале Autodesk EAGLE: Use Fusion 360 for you next electronic design. Why?

Learn how to improve data sharing across teams and companies with the versioning and collaboration set up and use the elevated violator options to allow more efficient component placement and routing. Design your products, avoiding costly re-designs and manufacturing oversights with the electromechanical workflow available within Fusion 360.

Новое видео на канале Altium Academy: Snapping When Creating Polygons in Altium Designer | PCB Routing

When creating polygons, PCB Designers can use snap points to form fit their polygons to the exact size and shape they need. Learn how to set your snap points, which ones are most helpful for creating polygons, and how to use the same techniques to create keep out and solder mask areas.

Новое видео на канале Сергея Янкина: Постобработка и визуализация результатов расчетов в COMSOL Multiphysics

В рамках данного видеоурока на конкретном простом примере мы продемонстрируем наиболее характерные аспекты постобработки, обсудим новые инструменты для этих целей, которые появились в новых релизах пакета, и покажем наиболее эффективные техники работы с данными любого расчета.

Среди рассмотренных функциональных возможностей: создание и настройка 1d, 2d, 3d-графиков, расчет числовых данных в узле Derived Values, использование геометрических выборок, работа с наборами данных (Data Sets), размещение дополнительных данных на графиках, сопряжение данных и сравнение результатов, экспорт изображений и данных.

Новое видео на канале DipTrace: Terminal Outline. DipTrace Feature Review

Новое видео на канале EMA Design Automation: Simulation Capabilities in OrCAD PCB Designer

Verifying the circuit performance before PCB production is a crucial step. However, with tight project timelines and budgets, completing this with prototyping is not always a practical option. The seamless PSpice simulation capabilities in OrCAD PCB Designer allow you to easily simulate circuit behavior directly from the schematic to ensure circuit functionality early in the design process. Meticulously analyze circuit performance to verify your design objective with the PSpice capabilities available in OrCAD PCB Designer.

Новое видео на канале Cadence PCB Design and Analysis: Advanced Routing Methods Overview | Allegro PCB Designer

Новое видео на канале Altium Academy: Using «Objects for Snapping» for Footprint Creation in Altium Designer

Новое видео на канале EDA Direct: StarVision PRO Quick Start Video #1 Reading in a Digital Design

This is a short video on how to read in a digital design into StarVision PRO. Also shown is how to easily cross-probe from the schematic to its source code and trace a specific part of the design by dragging a gate into the cone view and expand connections.

Новое видео на канале Сергея Янкина: Расчёт планарной катушки на печатной плате в COMSOL Multiphysics

В данном практическом видеоуроке рассмотрена пошаговая сборка электротехнической модели планарной катушки на печатной плате с использованием функциональных возможностей модуля AC/DC пакета COMSOL Multiphysics.

Новое видео на канале Keysight Design Software: What's New in PathWave System Design 2022 Update 0.2?

Новое видео на канале Cadence PCB Design and Analysis: High-Speed PCB Design Overview | Allegro PCB Designer

Интересная статья: Новое поколение решений для корпусирования интегральных схем

Это первая часть статьи, в которой обсуждается, почему современные, передовые технологии корпусирования интегральных схем (ИС) требуют нового подхода к процессу проектирования- от предварительного планирования корпуса и формирования прототипа до создания проекта, верификации, валидации, технологической подготовки к производству и виртуальных испытаний. Данные публикации познакомят с концепцией цифрового двойника: электронной виртуальной моделью разрабатываемого изделия, позволяющей осуществлять совместное комплексное проектирование на каждом этапе его разработки.

Новое видео на канале Altium Academy: How to Create and Snap to a Polar Grid in Altium Designer | PCB Layout

Новое видео на канале Robert Feranec: Should you place solder mask over BGA pads? Do you know why? | Tom Hausherr

How to decide on BGA pad size and if SMD (solder mask defined) or NSMD (non-solder mask defined) pad should be used. I asked Tom Hausherr

Новое видео на канале ELM: Расширенная электрическая верификация (DFE+) топологии печатной платы в Altair PollEx PCB

Новое видео на канале EMA Design Automation: How to Simulate Noise in OrCAD PSpice

Circuit simulations are often performed with ideal conditions; however, circuits experience noise in the field that can affect behavior and functionality. Simulating realistic noise by combining and configuring additional sources into a circuit can be a challenging and time-consuming. Easily incorporate noise into simulations and analyze realistic circuit behavior with configurable noise sources and randomization functions with OrCAD PSpice.

This tutorial will provide step-by-step instructions for three different methods for incorporating noise into circuit simulations including noise sources, Randomization Functions for Transient and DC Analysis (RNDR), and Randomization Functions for Sweeps (RNDC).

Новое видео на канале Cadence PCB Design and Analysis: PCB Miniaturization Overview | Allegro PCB Designer

Новое видео на канале Phil’s Lab: FPGA/SoC + DDR PCB Design Tips - Phil's Lab #59

FPGA/SoC with DDR3 memory PCB design overview, basics, and tips for a Xilinx Zynq-based System-on-Module (SoM).

Новое видео на канале Altium Academy: Electronic System Reliability & How the EDA industry Addresses It

Новое видео на канале Altair Engineering: Multiphysics Analysis of E Motors with Altair SimLab

When designing an electric motor, constraints from different physics must be fulfilled. Electric motor design requires multi-physics analysis: Altair SimLab provides a single user experience for all these different physics.

Inside SimLab, Altair Flux can be invoked to run the electromagnetic analysis. Once the electromagnetic analysis is finished, the magnetic force information can be applied as loading conditions for noise, vibration, and harshness (NVH) analysis using Altair OptiStruct. And the loss distribution (stator/rotor losses, winding loss) can be applied as heat sources for CFD analysis using Altair AcuSolve. Finally, Altair® HyperStudy serves as a multidisciplinary optimization platform for electric motor design.

Новое видео на канале Altium Russia: Лучший способ согласовать вашу схему

Серьезные проекты не делаются в одиночку - это всегда работа команды. Все схемотехнические идеи должны пройти путь от задумки автора до утверждения финального решения. В процессе разработки, а также после ее завершения крайне важно иметь возможность обсуждать с коллегами применяемые подходы и проводить кросс-проверку. Современный ритм выпуска электронных устройств подразумевает удобные инструменты сопровождения процессов разработки, в том числе и рецензирования схемотехнических решений.

Очередное видео с фичей недели на канале Ansys Photonics: New Autoscale PML Parameters Feature

Новое видео на канале DipTrace: Selectable and Searchable Text in PDF. DipTrace Feature review

Новое видео на канале Robert Feranec: PCB Stackup Explained - What layer ordering is good or bad and why | Rick Hartley

Новое видео на канале EEsof AE Tips: SystemVue: What's An Envelope Signal?

This video includes an explanation of the Envelope signal concept in SystemVue, and how it speeds up the analysis of high frequency signals. It also includes a technique for treating an Envelope signal as a normal waveform so that you can use an Envelope signal with an A-to-D converter.

Новое видео на канале Altium Academy: How to work with Net Classes in Altium Designer | PCB Layout

Новое видео на канале Cadence PCB Design and Analysis: How to define electrical design rules for your PCB | Allegro PCB Designer

Интересная статья: Малошумящий усилитель с отключением усиления

Представлены результаты разработки и изготовления СВЧ-модуля, выполняющего функции малошумящего усилителя с отключением усиления в диапазоне рабочих частот 1,0–4,0 ГГц. В состав модуля входят МИС дискретно-управляемого переключателя, драйвера управления и малошумящего усилителя. Получены СВЧ-характеристики и параметры изделия, подтверждающие возможность использования данных модулей в разработке и изготовлении элементов приемо-передающих модулей АФАР.

Новое видео на канале EMA Design Automation: How to Create and Import Custom Board Shapes and Cutouts

Новое видео на канале Robert Feranec: Do you need thick copper layers in PCB for high currents? Are you sure?

Интересная статья в блоге Coventor: There is Plenty of Room at the Top: Imagining Miniaturized Electro-Mechanical Switches in Low-Power Computing Applications

Новое видео на канале Mentor PCB Expert: PADS Professional: возможности Variant Manager

Новое видео на канале ELM: Быстрая оптимизация параметрической и сеточной геометрии в Altair Feko.

Новое видео на канале Altium Academy: How to Use the Polygon Manager in Altium Designer

Интересная статья: Создание статистической модели диффузного рассеяния СВЧ на основании моделирования в Altair FEKO 2021

В статье рассматриваются возможности применения коммерческой САПР Altair FEKO для исследования диффузного поля рассеяния и создания статистической модели на основе получаемых результатов. Автоматизированное создание случайно шероховатой поверхности с заданными пользователем геометрическими параметрами позволяет с высокой скоростью накапливать данные для их последующей обработки и выделения значимых особенностей. Создание статистической модели и ее последующее исследование помогает не только прогнозировать характер отражения электромагнитной волны от поверхности (по существу, решать прямую задачу), но и делать релевантные выводы относительно самой отражающей поверхности, то есть решать обратную задачу. В конце статьи приводится практический пример использования макроса.

Новое видео на канале Cadence PCB Design and Analysis: How to make your design manufacturable | Allegro PCB Designer

Новое видео на канале EEsof AE Tips: ADS: Silicon On-die-transmission-line Simulations (using emSetup)

Новое видео на канале Autodesk EAGLE: Quick Tip: Before you begin routing do this

With new innovations being established daily, designers need the necessary tools that optimize their design flow without sacrificing quality. Fusion 360 provides your team with a collaborative environment by which your electronic and mechanical engineers can instantly adapt to changes.

Новое видео на канале remcomsoftware: Demo 2: Indoor mmWave Radar Sensor

Интересная статья: Тепловой анализ жизненно важен для мощных СВЧ МИС, многокристальных модулей и печатных плат РЧ-изделий

Статья посвящена анализу тепловых режимов в мощных СВЧ-микросхемах. Поскольку обеспечивать охлаждение электронных устройств зачастую очень сложно, материал представляет практический интерес для специалистов.

Новое видео на канале Altium Academy: How to Remove Unused Pad Shapes in Altium Designer | PCB Layout

Новое видео на канале AMCAD Engineering: Simulation of an Active Antenna, load pull effect caused by the beamsteering on the Power amplifier

Интересная статья: Сравнительный анализ и оптимизация оптических переключателей и модуляторов для радиофотоники на основе электрооптических полимеров

Новое видео на канале Cadence PCB Design and Analysis: Measurement Functions in PSpice

With PSpice you can easily measure different parameters in your design without any manual calculations. In this video, learn how to easily create measurement expressions and use measurement functions.

Новое видео на канале EEsof AE Tips: EMPro: Import a 3D Model to use in ADS RFPro Simulation

This video provides a step-by-step overview of importing a 3D model (RF connector in this case) into EMPro, assigning appropriate materials, modifying or adding content to the model, saving for use in ADS, and finally using the 3D model in an ADS RFPro FEM simulation.

Новое видео на канале DipTrace: Connect Net to Pin by Name. DipTrace Feature Review

Новое видео на канале remcomsoftware: Demo 1: Automotive Radar

WaveFarer is high-fidelity radar simulation software for drive scenario modeling and indoor detection applications. WaveFarer enables fast and accurate analysis of scenarios with radars in close proximity to structures, targets, and other features in a simulated environment.

Key features include:

Reveals backscatter from road surfaces and vehicle interiors, elevating realism of simulations by providing a more accurate representation of conditions in the real world.

Transmits through walls, windows, or other materials, supporting indoor sensor applications where waves can penetrate into neighboring rooms or capturing interactions with the interior structures of a vehicle.

This series of short video clips highlights WaveFarer's capabilities.

Новое видео на канале EMA Design Automation: How to Perform Frequency Response Analysis

Devices such as switched-mode power supplies and RF amplifiers require a full analysis of open-loop gain across their entire operating spectrum to ensure proper behavior; however, calculating gain and phase shift at each individual frequency is tedious and time-consuming.

With the Frequency Response Analysis included in OrCAD PSpice Designer, open-loop gain analysis becomes simple with automated analysis and Bode plot creation. This tutorial will provide step-by-step instructions for configuring, performing, and evaluating frequency response analysis in OrCAD PSpice Designer.

Очередное видео с фичей недели на канале Ansys Photonics: Script Library for III-V Optical Materials Properties

In our video this week, we present the ability to add group III-IV semiconductor optical material data. The default material data base in FDTD/MODE does not include the ternary or quaternary Group III-IV semiconductors. This new feature provides a tool for calculating these optical properties through GUI or script and then adding them to material data base.

Новое видео на канале IEEE Microwave Theory and Techniques Society: IEEE MTT-S Distinguished Microwave Instructors Webinar

This webinar includes three talks:

1. The Long Way of RF Technology: from TV & Radio to Wearable Sensors by Prof. Maurizio Bozzi, University of Pavia, Italy.

2. Wireless Energy – A NetZero Alternative for Radio Communications by Prof. Nuno Carvalho, University of Aveiro, Portugal.

3. Reducing Carbon Footprint of 5G Using RF/Microwave Technology by Prof. Anding Zhu, University College Dublin, Ireland

Новое видео на канале Altium Academy: AD 22.5 Overview

Компания Ansys сообщила о покупке компании Motor Design Limited (MDL) и добавлении ее продукта Motor-CAD к существующему портфолио для разработки электрических машин.

Новое видео на канале Altium Academy: How to Change Polygon Types in Altium Designer | PCB Layout

Интересная статья: Интеллектуальная САПР «Смекалец»: быстрый и простой синтез свч интегральных схем

В статье представлена САПР «Смекалец», разрабатываемая компанией 50ohm Technologies. ПО ориентировано на автоматический синтез схемотехнических решений и эскизов топологий как монолитных интегральных схем, так и многофункциональных интегральных схем СВЧ-диапазона. САПР «Смекалец» подготавливает схемные решения, учитывая особенности технологических процессов. Приведенные результаты измерений изготовленных образцов монолитных интегральных схем СВЧ-диапазона подтверждают работоспособность предложенных подходов.

Новое видео на канале Anurag Bhargava: RFPro-22: Swept 3D Model Analysis in RFPro

Learn how to run swept 3D model analysis in RFPro which offers the great capability to run parametric sweeps with your own custom 3D components with great ease.

Новое видео на канале Cadence PCB Design and Analysis:How to create hierarchical blocks | OrCAD Capture

Sometimes a similar circuit is used multiple times in the same schematic as well as in other projects. Copying the complete circuit again and again can be tedious as well as error prone. With OrCAD PCB Designer, you can easily create Hierarchical blocks which makes design access easier and can be used anywhere in the same design as well as in other designs.

Интересная статья: Take Advantage of 3D EM Simulation for Densely Packed Designs

Small form factors are often crucial for today’s applications, leading to scenarios in which surface-mount components are densely packed onto printed circuit boards (PCBs). When components are packed into a small space, the components can couple to one another because of their close proximity. Unfortunately, these coupling effects cannot be captured in simulations when equivalent-circuit models are used for the components. However, it is possible to capture these effects by performing a full-wave 3D electromagnetic (EM) simulation that includes models defined by 3D geometry and detailed material composition. This article will demonstrate how 3D models can be used to accurately predict the real-life performance of designs in which components are located very close to one another.

Новое видео на канале EEsof AE Tips: SystemVue: Array Antenna Modeling with Custom Element Mapping

This video presents accurate modeling of an array antenna in a system level tool (SystemVue). Electromagnetically simulated or measured data of an array antenna can be brought into SystemVue where one can integrate with rest of the electronics and explore the performance margins. One has to make sure to represent the configuration, in terms of element mapping, of the array antenna exactly. This video covers the implications of custom element mapping feature.

Новое видео на канале SynMatrix: Automatically Generating Rectangular Waveguide 3D Models in Ansys HFSS

In the latest SynMatrix product release teaser video, we show how a user can use SynMatrix to automatically generate 3D models for a rectangular waveguide structure with two transmission zeroes. SynMatrix currently supports both cylindrical and rectangular waveguide structures. This module will help users automatically build 3D models and run the simulation in the integrated SynMatrix - Ansys HFSS workflow. Combined with the AI optimization workflow that is also integrated with Ansys HFSS, design engineers can accelerate their design workflow.

Новое видео на канале EMA Design Automation: How to Define Through-hole Pads using OrCAD and Allegro Padstack Editor

How to Define Through-hole Pads using OrCAD and Allegro Padstack Editor. Learn about the user interface and GUI of the Padstack editor in OrCAD and Allegro PCB as well as types of mask layers. Create through-holes by determining the margins, offsets, and naming conventions as defined by IPC standards.

Новое видео на канале CST microwave studio Designing and Simulation: How to design metamaterial in transmission mode.

An electromagnetic metasurface refers to a kind of artificial sheet material with sub-wavelength thickness. Metasurfaces can be either structured or unstructured with subwavelength-scaled patterns in the horizontal dimensions. In electromagnetic theory, metasurfaces modulate the behaviors of electromagnetic waves through specific boundary conditions, rather than constitutive parameters in three dimensional (3D) space, which is commonly exploited in natural materials and metamaterials. Metasurfaces may also refer to the two-dimensional counterparts of metamaterials. One the most important applications of metasurfaces is to control a wavefront of electromagnetic waves by imparting local, gradient phase shifts to the incoming waves, which leads to a generalization of the ancient laws of reflection and refraction. In this way, a metasurface can be used as a planar lens, vortex generator, beam deflector, axicon and so on.

Новое видео на канале Altium Academy: How to Create Polygons in Altium Designer | PCB Layout

Learn how to create polygon pours in Altium Designer to ensure proper copper distribution on your board. We explore polygons in PCB Design, creating a polygon in Altium Designer, changing its shape, nets, and more.

Новое видео на канале remcomsoftware: What is WaveFarer?

WaveFarer is high-fidelity radar simulation software for drive scenario modeling and indoor detection applications. WaveFarer enables fast and accurate analysis of scenarios with radars in close proximity to structures, targets, and other features in a simulated environment. Key features include: Reveals backscatter from road surfaces and vehicle interiors, elevating realism of simulations by providing a more accurate representation of conditions in the real world. Transmits through walls, windows, or other materials, supporting indoor sensor applications where waves can penetrate into neighboring rooms or capturing interactions with the interior structures of a vehicle. This series of short video clips highlights WaveFarer's capabilities.

Новое видео на канале DownStreamtech: Working with 3d in CAM350 using intelligent data as well as Gerber&NC

Новое видео на канале Siemens Software: Tech Tips Simcenter Flotherm XT - PCB electrothermal analysis - HyperLynx PI co-simulation.

Новое видео на канале EDA Direct: StarVision PRO - Quick Start Video #29 - Performing Clock Domain Analysis

Статья от 2015 года об отечественном продукте: Моделирование высокочастотных схем в частотной области при помощи САПР Qucs

В статье рассматриваются возможности симулятора электронных схем Qucs для моделирования высокочастотных электронных схем: моделирование S параметров, расчет комплексных входных и выходных сопротивлений, использование диаграмм Смита. Подробно описываются встроенные математические функции для работы с матрицей рассеяния. Приведен обзор новых функций для синтеза СВЧ-фильтров, добавленных в версии 0.0.19.

Новое видео на канале EEsof AE Tips: ADS: Getting Started with Memory Designer (DDR5)

This video provides a step-by-step tutorial on how to use a pre-layout model of 8 DQ lines and one DQS pair in ADS Memory Designer to set up and run a DDR5 simulation. This includes the detailed setup for the simulation and the display of the results.

Новое видео на канале Cadence PCB Design and Analysis: Constraint Driven PCB Design Overview -Allegro PCB Designer

Constraint-driven checks, whether electrical, physical, mechanical or manufacturing are all critical to your design process as they help you identify and mitigate potential problems in real-time.

Компания #Modelithics выпустила очередную версию библиотеки COMPLETE Library™ v22.1 for Keysight Technologies’ PathWave Advanced Design System. Добавлено 26 новых моделей.

Новое видео на канале Microwave Journal: Cadence's AWR Microwave Office Thermal Integration Demonstration

Новое видео на канале Cadence PCB Design and Analysis: How to reuse component placement | OrCAD PCB Designer

You often have more than one similar circuit instance in your schematic. Creating exactly the same layout for all instances in PCB is time-consuming and erroneous. With OrCAD, it's easy to create a known good design module and reuse it in current designs and other designs without reinventing the wheel.

Новая статья на сайте TICRA: Predicted and Measured Antenna Patterns of the European Large Deployable Reflector

Новое видео на канале Altium Academy: Polygon Editing in Altium Designer | PCB Routing

Editing existing polygons is crucial for optimizing your design. In Altium Designer, you can easily select polygons to resize, combine, and more. Learn how to define, edit, combine, divide, and subtract polygons in Altium Designer here.

Интересная статья: Широкоугольные многолучевые антенны на основе бифокальных систем

С использованием численного моделирования методом конечных элементов и в приближении Кирхгофа исследованы характеристики многолучевых антенн с широким углом обзора на основе планарных бифокальных двухзеркальных, зеркально-линзовых и линзовых систем с оптимизированными параметрами. В приближении Кирхгофа рассчитаны характеристики многолучевой антенны на основе трехмерной диэлектрической бифокальной линзы. Проведены измерения зависимости коэффициента усиления от угла обзора макета многолучевой антенны на основе планарной бифокальной диэлектрической линзы.

Новое видео на канале Altium Academy: Altium Designer Best Practices - Part 2 - AltiumLive 2022

Новое видео на канале Altair How-To: Altair WRAP: WiMAX

Новое видео на канале Anurag Bhargava: RFPro-21: Using 3D models in RFPro

Новое видео на канале EDA Direct: StarVision PRO/RTLvision PRO - Quick Start Video #28 - Perform ECO changes

Новое видео на канале Altium Russia: Все ваши шаги сохранены

В рамках вебинара Вы узнаете, как не запутаться во всех сохраненных версиях Вашего проекта, и с легкостью отследить различия между ревизиями как проектных данных, так и файлов для производства.

Новое видео на канале Robert Feranec: How to add PCIE to FPGA - Just to give you an idea how it is done - Adam Taylor.

Новое видео на канале Cadence PCB Design and Analysis: Analysis Driven PCB Design Overview - Allegro PCB Designer

Новое видео на канале DipTrace: Optimize Ratlines. DipTrace Feature Review

Новое видео на канале CST microwave studio Designing and Simulation: How to calculate PCR using Python||How to design metamaterial

Новое видео на канале Altium Academy: Altium Designer Best Practices - Part 1 - AltiumLive 2022

Charley Yap reviews the benefits of organizing schematic design into a hierarchical top-down or bottom-up structure and the impact schematic directives and PCB planning have on PCB layout. He also addresses the hazards of creating classes in the PCB rather than in the schematic.

Новая статья на сайте TICRA: A Doubly Curved Modulated Frequency Selective Surface Sub-Reflector in a Dual-Band (Tx/Rx) Multiple-Beam Reflector Antenna

A dual-band (Tx/Rx) multiple spot beam reflector system for high throughput satellites in Ka-band is presented. The configuration is a multiple-feed-per-beam dual reflector Cassegrain antenna with a frequency selective surface (FSS) sub-reflector that separates the response between Tx and Rx frequency bands. Using this configuration, a full multiple-beam coverage employing the four-colour frequency/polarisation reuse scheme can be produced using only a single main reflector. By utilising a modulated FSS sub-reflector, the performance of the antenna system is significantly improved compared to using a periodic element distribution on the sub-reflector.

Новое видео на канале Autodesk EAGLE: Whats new january 2022 A

In the Autodesk Fusion 360 Electronics update for January 2022, we have added many helpful interface updates. These Fusion 360 Electronics updates will optimize your design time, including additional options to streamline your electromechanical design workflow. User selection of the PCB origin and X-Axis plane in the mechanical workspace will remove the guesswork of the component placement layer for the electronic PCB layout engineer.

Новое видео на канале Labcenter Electronics: Diff-Pair Pass Through in #Proteus v8.14 Update

It is now possible to specify and use pass through components on differential pairs in the Proteus software. This is ideal for passive devices such as resistors on a phase matched pair.

Очередное видео с фичей недели на канале Ansys Photonics: Data Driven Ring Model for the CML Compiler

Новое видео на канале Cadence PCB Design and Analysis: Signal routing in rigid flex designs - OrCAD PCB Designer

Flex part of a PCB is commonly used to transmit signals in rigid parts of a multi-board design. With OrCAD, you can easily assign dedicated stackups to flexible areas of your design which allow you to transmit signals between multiple boards without needing cables and connectors.

Новое видео на канале Altium Academy: Fine-Tuning Signal Delay Using Pin Package Delay in Altium Designer

There are a few things to consider when adding and tuning signal delay to your PCB design. Altium Designer gives you the tools to fine-tune signal delay. We'll show you how to easily make it work, using pin package delay.

Интересная статья в блоге Coventor: 3D Solid Model Creation using Process and Layout

You’ve certainly heard of “3D Solid Modeling”. The term first originated in the verification engineering community and has now become nearly ubiquitous. Mainstream industries like entertainment media, 3D printing and even home improvement design have now adopted the phrase and have made it a symbol of our times. The engineering community has a collective understanding of 3D Solid Modeling which is often different from the mainstream use of the term. 3D Solid Modeling is more than just a virtual representation of an object that looks amazing and can be produced using a 3D printer. For most engineers, 3D Solid Modeling is the gateway to Finite Element Analysis (FEA).

Новое видео на канале DipTrace: Optimize RefDes. DipTrace Feature Review

Новое видео на канале Autodesk EAGLE: March 2022 What's New

Since the release of Fusion 360 electronics, we feel that this update has the newest and improved features our users have requested and will improve your design experience. Our developers have worked hard to make the overall 3D experience much faster. Managing the hundreds of libraries that provide over 50 thousand components is now more manageable with the new Library Manager interface and Place Component panel. We have eliminated the guesswork of identifying the source and made it easier to find the part your need for your design. Seamless import of EAGLE library files and full support of Autodesk EAGLE Design Blocks will be some of the enhancements that will make it easier to migrate to Fusion 360. The new capability of inserting a schematic or circuit board into your current design will allow you to use proven technology you may have already used or use reference designs provided by manufacturers. These new features and improvements will give you a faster and better design experience when using Fusion 360 electronics.

Новое видео на канале ELM: Библиотека компонентов в Altair Feko 2021

В данном видео мы знакомимся с библиотекой компонентов Altair Feko. Приводятся основные различия между активными и пассивными компонентами, сферы их применимости и возможные задачи для их использования. В качестве примера рассматриваем две антенны из библиотеки: зеркальную антенну с рупорным облучателем и стандартную топологию антенны Вивальди. В качестве примера пассивного объекта используется модель балочной башни, которая может выступать как основой для крепления антенн, так и элементом застройки при трассировки лучей в открытой местности.

Новое видео на канале Anurag Bhargava: RFPro-20: Parametric EM Analysis in RFPro

Learn how to run parametric EM analysis in RFPro using the new feature introduced in the ADS 2022U2 release which is very useful as well as exciting for circuit designers.

Новое видео на канале Altium Russia: Всё ли Вы знаете о своём проекте?

В рамках вебинара Вы узнаете, так ли важно хранить промежуточные версии, какие есть способы хранения ревизий, а также какими дополнительными возможностями по хранению изменений файлов проекта обладает Altium Designer.

Новая статья на сайте TICRA: RF Modeling and Measurements of a Reflectarray for Synthetic Aperture Radar for Earth Observations

Design and simulation results of a polarisation-selective reflectarray in Ka band are presented. The reflectarray is part of a dual-offset antenna system for a high-resolution and wide-swath Synthetic Aperture Radar (SAR) instrument that operates in both a high-resolution mode with a directive beam in one polarisation, and a low-resolution mode with a broader beam in the orthogonal polarisation. Fed by orthogonal modes, a sectoral horn illuminates the reflectarray antenna with different beam widths for the two operational SAR modes. Radiation patterns of the feed and reflectarray antenna system are presented.

Новое видео на канале ELM: Расчет эффективной площади рассеяния (ЭПР) тел сложной формы в Altair Feko 2021

В этом видео рассматриваются возможности использования САПР Altair Feko 2021 для расчета эффективной площади рассеяния (ЭПР) тел сложной формы, на примере моделей квадрокоптера из стандартной библиотеки компонентов. Приводится актуальность задач анализа ЭПР, коротко рассматриваются основные теоретические положения. Объектами предметного исследования являются упрощенная и детализированная геометрии квадрокоптеров, расчет ЭПР которых производится методом физической оптики.

Новое видео на канале Cadence PCB Design and Analysis: PCB Manufacturability Overview - Allegro PCB Designer

Working with your PCB manufacturer and setting up your fabrication, assembly and testing checks from the beginning can help you easily identify and avoid any unexpected problems before they disrupt your project’s timeline and budget.

Новое видео на канале IEEE Microwave Theory and Techniques Society: Multi-Function Multi-Band Reconfigurable High-Q Filters by Raafat Mansour

Reconfigurable filters are key components in the development of agile multi-standard receivers. The advent of innovative switched capacitor arrays and switch technologies based on Silicon on Sapphire, Micro-Electro-Mechanical Systems (MEMS) and Phase Change Material (PCM) technologies permits the development of a new generation of high linearity, low loss, and low power consumption tunable components. In this new generation of reconfigurable microwave front-ends, microwave reconfigurable filters are among the most critical and challenging components to perform adaptive frequency-band selection.

Интересная статья в блоге 3DS: Magnets for Magnetic Resonance Imaging

Magnets are ubiquitous in modern life, used in motors, generators, wind turbines, steel foundries, toys, and all sorts of technological equipment. They are also essential for several distinct classes of devices, including Magnetic Resonance Imaging scanners.

Different types of coils used in Magnetic Resonance Imaging and their simulation with SIMULIA Opera® are introduced in this blog post. Aspects of superconducting coil simulation and the shielding of the strong magnetic fields to minimize human exposure will also be discussed.

Новое видео на канале Keysight Design Software: Channel Quality/Group Delay X-Series Measurement Application

In this video, Dr. Joel Dunsmore demonstrates Keysight's Channel Quality/Group Delay X-Series measurement application. Dr. Dunsmore uses the application to measure the gain and group delay of a wideband filter using a VXG signal generator to generate the multi-tone signals and then uses a UXA signal analyzer as a receiver to determine the gain, phase and delay from the measured multi-tone signal. Dr. Dunsmore also compares the measurement results with the traditional method using a PNA network analyzer and demonstrates that the results are closely matched.

Новое видео на канале DownStreamtech: Change feature size and shape

We look at three different ways to change the size and shape of a feature in CAM350.

Новое видео на канале Synopsys: Optical Scattering Measurements

Retro Reflective Sample Measurement with OSG Instrument Solution for LIDAR Application.

Новое видео на канале EMA Design Automation: How to Quickly Find Parts in OrCAD PSpice

A realistic simulation is often required to verify circuit behavior before PCB production. Extensive model libraries of generic components as well as manufacturer specific parts can help produce an accurate simulation; however, it can be overwhelming and difficult to find the correct part, especially if the exact part number is still unknown.

Новое видео на канале Synopsys: Addressing IoT Connectivity Challenges with Low-power NB-IoT Modem Solutions

Low power IoT connectivity requires modem chipsets and integrated wireless options to enable cost-effective deployment. Watch the video to learn about processor based subsystems and RF transceivers that can speed your IoT communications SoC to market.

Новое видео на канале IEEE Microwave Theory and Techniques Society: Fundamentals Of RF And mm-Wave Power Amplifier Designs by Hua Wang

This distinguished lecture talk presents an overview of RF and mm-wave Power Amplifier (PA) designs in silicon, focusing on the fundamentals, design practices, and advanced PA topologies. First, the distinguished lecture talk will introduce PA performance metrics and their impacts on wireless systems. Next, it presents PA device-level designs, including active device large-signal operations, nonlinearity, and stability as well as passive network impedance transformation and power combining. Basic load-/source-pull simulations and biasing techniques will be covered. Then, the talk will go through popular PA classes of linear and switching PAs. The talk will cover a wide variety of advanced PA topologies that enhance bandwidth, efficiency and linearity. Finally, the distinguished lecture talk will conclude with several PA design examples at RF and mm-Wave frequencies.

Анализ показателей надежности печатных узлов разработанных в Altium Designer в системе Асоника-Б.

Новое видео на канале Cadence PCB Design and Analysis: Schematic Design for Reliability Overview | Allegro System Capture.

Effortlessly run design rule checks and electrical stress simulations on your entire circuit to identify and resolve any underlying issues so you can produce robust and reliable designs from the beginning.

Новое видео на канале Synopsys: Virtual Hardware “In-the-Loop” (vHIL) with the R-CAR Virtual Prototype and Simulink.

This video shows a virtual prototype simulation with Synopsys Virtualizer™ on the Renesas R-CAR model using AUTOSAR adaptive cruise control and a Renesas SoC with CANBUS and SIMULINK Plant Model.

Новое видео на канале Pcb-tracing: Вебинар - Проектирование в Altium Designer 22. Этап 1: Подготовка и настройка системы

Новое видео на канале IEEE Microwave Theory and Techniques Society: Distributed Phased Arrays: Challenges And Recent Progress by Jeff Nanzer

Новое видео на канале Altium Academy: High-Speed Tuning in Altium Designer

If you use high-speed interfaces like USB 3.0, PCIE, or DDR3/DDR4, you need to use match length tuning to ensure that they work properly. We’ll show you why and how, as well as demonstrate Altium Designer's tools for length-tuning.

Интересная статья: The Role of Planar Waveguides in Sensing Applications

Integrated optics find numerous applications in sensor technologies due to advantages such as precise sensitivity, compactness, and wide dynamic range accuracy. In integrated optical sensors, the sensing region consists of an optical waveguiding system that helps in sensing the measurements accurately.

Integrated optical sensors that depend on planar waveguides are popular for merits such as robustness, electromagnetic immunity, compactness, low cost, short response time, and high sensitivity. They also exhibit the inherent capability of integrating with fiber-optic networks. In this article, we will discuss the types and modes of planar waveguides, which are the basic building blocks of planar waveguide optical sensors.

Новое видео на канале ELM: Создание карт рабочих режимов ЭКБ проекта разработанного в Altium Designer в системе Асоника-Р

Новое видео на канале Cadence PCB Design and Analysis: How to reduce signal coupling in a high-speed design | Allegro PCB Designer

Новое видео на канале Anurag Bhargava: RFPro-19: Handling Hierarchical Designs in RFPro

Новое видео на канале Synopsys: Catalyst of Design - The Role of EDA in the Era of System-of-Chips.

Новое видео на канале Сергей Янкин: Моделирование кремниевых микромеханических резонаторов в COMSOL Multiphysics

Новое видео на канале Eremex DD: Редактор производственных файлов DeltaCAM. Текущее состояние и дальнейшие планы

Новое видео на канале Modelithics: Modelithics QuickStart Tutorial For Keysight Technologies' PathWave System Design (SystemVue)

This video offer tips and benefits on using the Modelithics System Components Library for Keysight Technologies' PathWave System Design (SystemVue). It will also showcase the importance and capabilities of the Modelithics models.

Интересная статья в блоге Altium: Основы проектирования СВЧ плат.

Разработчики цифровых устройств, вероятно, знакомы с некоторыми ограничениями, свойственными СВЧ компонентам и особенностями трассировки печатных плат, но для успешного проектирования СВЧ-плат нужно знать и уметь гораздо больше.

Новое видео на канале Altium Academy: Impedence Calculations Differential Pairs

Новое видео на канале ELM: Моделирование тепловых и механических воздействий проекта созданного в Altium Designer в АСОНИКА-ТМ

Новое видео на канале Cadence PCB Design and Analysis: Schematic Capture Overview - Allegro System Capture

Предлагаем вашему вниманию полезную книжку: Введение в системы автоматизированного проектирования интегральных микросхем. Часть I

Учебно-методическое пособие подготовлено на кафедре физики полупроводников и микроэлектроники физического факультета Воронежского государственного университета.

Новое видео на канале Eremex DD: Цифровое моделирование в САПР Delta Design. Планы по развитию функционала

Новое видео на канале Robert Feranec: Up to 255 Amps Power Supply Schematic and PCB Layout - Server Board Design

What do you think, what is the maximum current for a Motherboard's or Server's CPU? This is a highlight from my video series where I am going through a schematic and PCB layout of a server board.

Новое видео на канале Labcenter Electronics Ltd: Diff-Pair Pass Through in Proteus v8.14 Update

It is now possible to specify and use pass through components on differential pairs in the Proteus software. This is ideal for passive devices such as resistors on a phase matched pair.

Новое видео на канале ELM: Altair PollEx for Altium Designer: тепловой анализ топологии печатной платы (Thermal Analysis)

В этом видео мы расскажем о бесплатном программном решении Altair Pollex for Altium для пользователей Altium Designer. Произведем настройку проекта для проведения теплового анализа, подключим тепловые модели, рассмотрим двухрезисторную тепловую модель и распределение температурного градиента.

Новое видео на канале Altium Russia: Один из способов ускорения разработки

Новое видео на канале EMA Design Automation: How to Create Schematic Templates (In OrCAD Capture)

In this video, learn how to design schematics more professionally by updating page size, title blocks and creating a template with your company logo. Easily create a titleblock template including revision number, title, reviewer and author.

Новое видео на канале MATLAB: What Is Bluetooth LE? Simulate and Design Bluetooth LE Systems using MATLAB.

Bluetooth LE is a wireless communication protocol introduced in Bluetooth 4.0. It was designed to consume significantly less power than Bluetooth Classic and supports applications such as health care, audio, industrial automation, consumer electronics, and localization.

Understand the typical challenges associated with modeling Bluetooth LE systems, such as coexistence with WLAN and scheduling requirements. Simulate Bluetooth LE systems, and analyze and visualize network performance using MATLAB and Bluetooth Toolbox. These performance metrics include energy consumption, latency, packet delivery ratio, and bit error rate.

Новое видео на канале Сергей Янкин: Моделирование волновых оптических процессов в COMSOL Multiphysics

Модуль Волновая Оптика пакета COMSOL Multiphysics предоставляет широкий спектр техник и инструментов для решения задач интегральной и волоконной оптики, фотоники и плазмоники, среди которых:

В данном материале проведен проведен разбор современного функционала данного модуля, затронуты вопросы задания и настройки портов, описания потерь в дисперсионных средах, использования PML, расчетов в дальней зоне и т.п. Особый акцент сделан на уникальную технологию Beam Envelope для полноволного эффективного моделирования протяженных систем типа делителей пучка, оптических фильтров и длиннофокусных линз.

Новая статья в февральском номере журнала HFE о программном обеспечении AWR, которое сейчас принадлежит компани Cadence: Chip, Package, and Board Beamforming Solutions

RF front-end architectures grow more complex with each generation of communication systems. To accommodate these architectures, more densification and miniaturization is taking place with electronic systems implemented through innovations in system-in-package (SiP) design.

Новое видео на канале Cadence PCB Design and Analysis: Using Design Rule Checks for HDI Designs - Allegro PCB Designer

Новое видео на канале ELM: Altair PollEx for Altium верификация топологии платы разработанной в Altium Designer

Новое видео на канале IEEE Microwave Theory and Techniques Society: Extreme Field Control with Electromagnetic Metasurfaces by Anthony Grbic

The research area of metamaterials has captured the imagination of scientists and engineers over the past two decades by allowing unprecedented control of electromagnetic fields. The extreme manipulation of fields has been made possible by the fine spatial control and wide range of material properties that can be attained through subwavelength structuring. Research in this area has resulted in devices which overcome the diffraction limit, render objects invisible, and even break time reversal symmetry. It has also led to flattened and conformal optical systems and ultra-thin antennas. This seminar will identify recent advances in the growing area of metamaterials, with a focus on metasurfaces: two dimensional metamaterials. The talk will explain what they are, the promise they hold, and how these field-transforming surface

Новое видео на канале aldecinc: VHDL 2019 Just the New Stuff Part 1: Interfaces, Conditional Analysis, File IO, & New Environment

IEEE 1076-2019, fondly referred to as VHDL-2019, was approved by IEEE RevCom in September 2019 and published in December 2019. The effort was supported mainly by VHDL users – from requirements definition to LRM writing. This is different from the past where employees of EDA vendors did much of the work – particularly the LRM writing.

Новое видео на канале Ansys: Ansys Maxwell - Overview

Ansys Maxwell is a comprehensive electromagnetic field simulation software for engineers tasked with designing and analyzing 3D/2D structures, such as motors, actuators, transformers and other electric and electromechanical devices. Based on the Finite Element Method (FEM), Maxwell can solve static, frequency-domain and time-varying electromagnetic and electric fields.

Новое видео на канале Eremex DD: Интеграция ПО АСКОН и Delta Design, как составная часть сквозного цикла проектирования изделий РЭА.

Новое видео на канале MATLAB: High-Speed Data Transmit/Capture Using MATLAB and USRP

Wireless Testbench™ offers a high-speed data transmit/capture feature. You can leverage this feature to enable the transmit and capture of up to 250 Msps on supported USRP™ hardware. It also provides optimized data I/O between MATLAB® and supported USRP hardware. You can transform the connected radio into a baseband receiver, baseband transmitter, and baseband transceiver operating at full device rates. You can transmit and capture signals such as 5G, LTE, satellite, and custom signals from the air. You can also implement loopback workflows.

Новое видео на канале Сергей Янкин: Расчеты устройств на поверхностных акустических волнах в COMSOL Multiphysics

Новое видео на канале Cadence PCB Design and Analysis: Allegro PCB Designer Demo - Advanced Routing Technologies

This demo quickly goes through some of the different routing methods available within Allegro PCB Designer so you can improve design time. Utilize methods such as the scribble router, timing vision and via arrays just to name a few.

Новое видео на канале DownStreamtech: Customize pcb views on Assembly drawings. Mark pin one, turn on pins, add fills, modify ref des, all of these are things you can do in Blueprint to customize your pcb view.

Новое видео на канале ELM: Altair PollEx for Altium Designer: анализ целостности сигналов (Signal Integrity)

В этом видео мы расскажем о бесплатном программном решении Altair Pollex for Altium для пользователей Altium Designer. Произведем настройку проекта для проведения анализа целостности сигналов, подключим IBIS модели, рассмотрим осциллограмму формы сигнала и глазковую диаграмму.

Новое видео на канале Robert Feranec: Do you connect PCB mounting holes correctly? | Keith Armstrong

So, do you only connect one hole or all of them? Do you connect them directly to ground or … ? Taken from my longer interview with Keith Armstrong.

Вышла очередная версия системы проектирования печатных плат KiCad 6.0.4. The KiCad project is proud to announce the latest 6.0.4 stable version contains critical bug fixes and other minor improvements since the previous release.

Новое видео на канале Eremex DD: Опыт внедрения САПР электроники Delta Design на предприятии радиоэлектронной промышленности

Новое видео на канале Cadence PCB Design and Analysis: Allegro PCB Designer Demo - Design for Manufacturing

This demo focuses on mitigating potential design for manufacturing (DFM) problems within your designs in Allegro PCB Designer so they can meet quality and reliability standards. Easily identify and fix manufacturability issues early on for first pass success.

Новое видео на канале Ansys Photonics: Import Temperature Map From Icepak to INTC

In this week’s video, we introduce the new script command that imports temperature map from Icepak into Lumerical INTERCONNECT. The heat generated in co-packaged devices can considerably impact system performance since photonics components can be very sensitive to variations in temperature. With the addition of the new script command, importtemperaturemap, we are able to study the thermal effect on circuit performance and optimize the design.

Компания Downstream Technologies сообщила о выходе новых версий своих программ CAM350 v14.6 и BluePrint-PCB v6.6.

Новое видео на канале Anurag Bhargava: RFPro-18: RFPro in Virtuoso - Circuit Loaded Field Visualization for RFIC Designs.

Новое видео на канале ELM: Altair PollEx for Altium Designer: электрическая верификации топологии печатной платы (DFE).

Новое видео на канале Cadence PCB Design and Analysis: Using High Density Interconnection (HDI) in Your PCB Designs | Allegro PCB Designer. Learn how to utilize blind, buried and micro vias to save space and pack power in a more compact HDI design.

Новое видео на канале CST microwave studio Designing and Simulation: how to design metamaterial || how to calculate absorptivity part 2

Новое видео на канале Robert Feranec: Tutorial OrCAD 17.4 and Cadence Allegro PCB Editor | 2022 | Step by Step | For Beginners

After this tutorial you will know how to start designing your own boards in Cadence OrCAD and Allegro 17.4 . For everyone who would like to learn Allegro Design Entry CIS and Allegro PCB Editor and also for everyone who has never ever designed any boards, but would like to learn how to do it.

Новое видео на канале Keysight Design Software: Design & Troubleshoot for Stability in RF/MW Circuits under Linear/Nonlinear Conditions- Part 2 of 2.

A comprehensive review of all approaches to linear and nonlinear stability analysis in high frequency circuits, followed by an introduction of a powerful new technique called Winslow Stability analysis that replaces all 28 tedious traditional stability simulation with just one. Two live demos illustrate how this is done and concludes with a novel EM-circuit excitation technique to locate the causes of instability so that you can fix your design before building hardware.

Новое видео на канале Eremex DD: Особенности использования моделей компонентов производства АО «НПО «ЭРКОН» в САПР Delta Design

В докладе «Особенности использования моделей компонентов производства АО «НПО «ЭРКОН» в САПР Delta Design» директор по развитию НПО «ЭРКОН» Илья Малышев поделился опытом работы по созданию моделей их компонентов и продемонстрировал, как можно получить доступ к библиотекам на сайтах ЭРКОН и ЭРЕМЕКС.

Новое видео на канале Ansys: pyAEDT Simulation Automation in AEDT Icepak

pyAEDT automation is a powerful tool to compress and streamline workflows that minimize user interaction. This video shows how pyAEDT can be used to fully automate the end-to-end simulation of an electronics chassis, from CAD import to post-processing.

Новое видео на канале Оркада: Вебинар №4 - Электромагнитное моделирование сложных обтекателей за минуты.

Обтекатели используются во многих отраслях, включая аэрокосмическую, оборонную, электронную и телекоммуникационную. Моделирование сложных обтекателей с частотно-селективными поверхностями FSS обычно занимает дни и даже недели. Оптимизированная методика моделирования обтекателя, предлагаемая компанией Altair, сокращает это время до минут. На вебинаре представлен обзор решения Altair Feko-newFasant и его применение для проектирования систем.

Новое видео на канале ELM: Altair PollEx for Altium Designer: проверка технологичности топологии печатной платы (DFM).

В этом видео мы расскажем о бесплатном программном решении Altair Pollex for Altium для пользователей Altium Designer. Проведем верификацию топологии печатной платы перед производством, проверим наличие нарушений расстояния до контура печатной платы; расстояния между компонентами; расстояния между отверстиями; зазор между переходным отверстием и контактной площадкой; минимальный размер отверстия; зазор между контактной площадкой и проводником; контрольные точки.

Новое видео на канале Cadence PCB Design and Analysis: How to setup DFM design rules | OrCAD PCB Designer

Новое видео на канале Eremex DD: Новая версия первой российской САПР электроники Delta Design 3.5. Планы по развитию системы

Новое видео на канале MATLAB: Spectrum Monitoring Using MATLAB and USRP

Новая статья в блоге Ansys Club: Применение HFSS для моделирования инфраструктуры 5G

Новое видео на канале Keysight Design Software: Design & Troubleshoot for Stability in RF/MW Circuits under Linear/Nonlinear Conditions - Part 1 of 2.

Новое видео на канале Оркада: Вебинар №3 - Уменьшение помех при совместном размещении на больших платформах.

Новое видео на канале Cadence PCB Design and Analysis: How to Create board design template | OrCAD PCB Designer

Новое видео на канале Altair Academic Program: Learn Collocation Interference with Altair WRAP

Новое видео на канале Altium Russia: Как поддерживать проект в актуальном состоянии

Новое видео на канале SynMatrix: Part 3: Automatic 3D Cavity Filter Generation in Ansys HFSS (Full 3D Modeling w/no Trans. Zero)

Новое видео на канале Powersim: PSIM 2021b With Extensive New Functionalities

Компания Polar Instruments обновила библиотеки материалов Speedstack, добавив туда ядра и препреги AGC Meteorwave, AGC Mercurywave, N4000, N7000, Showa Denko GEA705G и GEA705G(L).

Новое видео на канале Micro Talks: Design of Miniaturarized Microstrip Patch Antenna using CST studio

Новое видео на канале Сергей Янкин: Расчёт полупроводниковых систем в COMSOL Multiphysics

Новое видео на канале Оркада: Вебинар №2 - Проектирование и анализ характеристик антенн.

Новое видео на канале Altair Academic Program: Learn Planning for Cellular Coverage with Altair WRAP

Новое видео на канале Ansys: ANSYS Maxwell - Overview

Новое видео на канале Micro Talks: DESIGN OF WEARABLE RECONFIGURABLE ANTENNA FOR IOT APPLICATIONS - PART-1

Новое видео на канале Cadence PCB Design and Analysis: How to determine impedance mismatch issues in the PCB design | Allegro PCB Designer

Новое видео на канале Ansys Photonics: CML Compiler Statistical S-parameter Model

Компания #Modelithics выпустила очередную версию библиотеки Modelithics COMPLETE+3D Library v22.0 для Ansys HFSS. Добавлены конденсаторы AMOTECH A60Z и A60L, чип-индуктивности Coilcraft 0201HL и многое другое.

Новое видео на канале Cadence PCB Design and Analysis: Part Search in a Unified Environment | Allegro System Capture

Компания Altair сообщила о покупке фирмы Powersim, производителя программного обеспечения для разработки источников питания. Продукты Powersim будут интегрированы в систему Altair Electronic System Design.

Новое видео на канале Robert Feranec: Designing a PCB patch antenna for WiFi and Bluetooth | KiCad | Philip Salmony.

Новое видео на канале Cadence Design Systems: Allegro Free Physical Viewer

Новое видео на канале Anurag Bhargava: RFPro-17: RFPro in Virtuoso - Transferring Virtuoso Designs to ADS

Новое видео на канале Cadence PCB Design and Analysis: How to find and fix design errors in the PCB using DRC Browser | Allegro PCB Designer

Новое видео на канале Synopsys: Testing and Monitoring Silicon Throughout Entire Lifecycle

Новое видео на канале MATLAB: What Is Signal Integrity Toolbox?

Новое видео на канале Labcenter Electronics Ltd: #Proteus Design Suite Test Point Integration

Новое видео на канале Cadence PCB Design and Analysis: How to place components in a group | OrCAD

Новое видео на канале Siemens: Common Design Challenges of IC Package Design

Новое видео на канале DipTrace: Array of Vias. DipTrace Feature Review

Новое видео на канале Сергей Янкин: Анализ мод СВЧ и оптических волноводов с помощью COMSOL Multiphysics

Интересная статья в блоге Siemens: Simcenter Flotherm XT 2021.2: What’s New in PCB thermal analysis and more- Siemens Digital Industry Software

Новое видео на канале Ansys Photonics: CML Compiler Avalanche Photodetector Model

Новое видео на канале VIAS3D: CST 2022 Technical Updates Session - Vias3D

Новая статья в блоге ANSYS Club: Новые возможности Ansys 2022 R1 для LF анализа

Новое видео на канале IEEE Microwave Theory and Techniques Society: Microwave Enabled Quantum Computing

Новое видео на канале Оркада: Вебинар №1 - Моделирование ЭПР и рассеяния в радиолокационных системах.

Новое видео на канале DipTrace: 3D Model by Model Generator. DipTrace Feature Review

Новое видео на канале Altium Russia: Вебинар Работать с результатами моделирования просто

Важнейшей частью процесса моделирования будущего устройства является анализ характеристик, полученных при расчетах. Правильная оценка результатов и скорость их обработки зависит не только от навыков специалиста, но и во многом определяется возможностями инструмента.

Продукт OpticStudio STAR Module разработки Zemax, сейчас Ansys получила награду Prism Award как лучший инновационный продукт в области оптики и фотоники. OpticStudio STAR Module from Zemax, an Ansys Company, Wins Coveted SPIE Prism Award in Software

Новое видео на канале Modelithics: Modelithics Short Waves: Modelithics Model Improvements in Keysight Genesys

Компания WIPL-D сообщила о выходе новой версии свего продукта WIPL-D Microwave Pro 6.0. WIPL-D Microwave Pro 6.0 is now released!

Новое видео на канале Siemens Software: Learn About A/D/RF Co-Design

Интересная статья: Согласование импедансов: симуляторы и симуляция. Часть 2. В предыдущей статье мы познакомились с общей идеологией симуляции при согласовании импедансов на примере бесплатного ПО. Посмотрим теперь, каких результатов можно ожидать от пакетов, которые используются в промышленности и стоят денег.

Новое видео на канале SynMatrix: Microwave Filter Real-time Test and Tuning using a Keysight VNA

Новое видео на канале DipTrace: 3D Model by Component Outline. DipTrace Feature Review

Новая статья в блоге ANSYS Club: Анализ мультифизики смартфона

Новое видео на канале Anurag Bhargava: RFPro-16: RFPro in Virtuoso - Simulating Process Variations with RFPro

Новое видео на канале aldecinc: HW/SW Co-simulation solution for Zynq SoC based systems using Riviera-PRO and QEMU.

Новое видео на канале SynMatrix: Automatic 3D Generation for Cavity Filters in Ansys HFSS (Part 2: Coupling Scheme and I/O Port).

Новое видео на канале Polar Instruments: PCB fine line impedance

Вышла версия KiCad 6.0.2. #The KiCad project is proud to announce the latest series 6 stable release. The 6.0.2 stable version contains critical bug fixes and other minor improvements since the previous release.

Интересная статья в блоге Ansys: 5G and Aircraft Safety: How Simulation Can Help to Ensure Passenger Safety. Part 2.

Новое видео на канале Robert Feranec: Altium Designer 22 Tutorial - Quick & Easy - Step by Step

Новое видео на канале CST microwave studio Designing and Simulation: how to design #metamaterial how to calculate absorptivity

Новое видео на канале Ansys: New NVH Capabilities in Ansys Motor-CAD 2022 R1

Новая статья блоге Ansys Club: Новые возможности Ansys 2022 R1 в EMA3D Cable

Новое видео на канале MATLAB: Reduced Order Modeling: Applications and Methods

Новое видео на канале Ansys: Predicting Accurate Winding Losses in Power Applications with Ansys Maxwell

Новое видео на канале Anurag Bhargava: RFPro-15: RFPro in Virtuoso - RFIC Amplifier Analysis with RFPro

Интересная статья в блоге Ansys: 5G and Aircraft Safety: How Simulation Can Help to Ensure Passenger Safety. Part 1

Новое видео на канале MATLAB: Modeling IEEE 802.11be (Wi-Fi 7) in MATLAB

Новое видео на канале TechXCorp: Chemistream_Startup_Example1

Новое видео на канале DipTrace: Exclude THT components from Pick and Place. DipTrace Feature Review

Новое видео на канале Altair Academic Program: Altair WinProp for Virtual Flight Test Scenario

Интересное видео на канале Castle Microwave: CST Studio How to Build A S1E3: Waveguide to Coax Adapter - Part 1

Новое видео на канале aldecinc: Riviera PRO Product Overview

Новое видео на канале Pcb-tracing: Вебинар Altium 365: Работа с системой через Web

Интересное видео на канале Tensorbundle: CST Tutorial: Control CST by MATLAB - 2.4 GHz Patch Antenna Simulation Example.

Новое видео на канале Altium Russia: Вебинар Проверка Ваших схемотехнических идей

Новое видео на канале SynMatrix: Automatic 3D Generation for Cavity Filters in Ansys HFSS (Part 1 - Single Cavity Analysis).

Новое видео на канале FlowCAD: OMNYA integration platform is a solution to manage electronic data integrated into PCB design environment.

Новая статья в блоге ANSYS Club: Новые возможности Ansys 2022 R1 для HF анализа.

Новое видео на канале MATLAB: Developing Next-Gen Wireless Communications for Aerospace and Defense: Physical Layer Modeling.

Новое видео на канале Anurag Bhargava: RFPro-14: RFPro in Virtuoso - Substrates and Differential Ports

Новое видео на канале Сергея Янкина: Моделирование антенн в COMSOL Multiphysics. Версия 6.0

Новое видео на канале Pcb-tracing: Вебинар Altium 365: Работа с управляемыми проектами

Новое видео на канале Altair Academic Program: Wave Propagation Solutions and Applications using Altair WinProp/WRAP

Новое видео на канале DownStreamtech: Customize drill symbol graphics and size using the Fabrication Manager

Новое видео на канале SynMatrix: Designing Microwave Filters Using Automatic 3D generation and AI Optimization in Ansys HFSS

Новое видео на канале Keysight Design Software: Accelerate 5G Circuit Designs Using Digitally Modulated Signals

Новое видео на канале DipTrace: Solder Mask Defined Pads. DipTrace Feature Review

Новое видео на канале Anurag Bhargava: RFPro-13: RFPro in Virtuoso - Getting Started

Новое видео на канале Pcb-tracing: Вебинар Altium 365: Централизованные шаблоны для Altium Designer

Новое видео на канале EMA Design Automation: Day in the Life of an OrCAD User

Интересная статья: IPC 7351: Explaining the Standard for PCB Footprints. One of the most crucial aspects of PCBA design that can simultaneously be the most difficult to perform is the creation of component footprints and landi…

Новое видео на канале DipTrace: Static Via to Ground Plane Connection. DipTrace Feature Review

Компания #Modelithics выпустила очередную версию библиотеки COMPLETE Library Version v21.9 for Sonnet Suites.

Новое видео на канале Altair University: Advances in Electromagnetic Solutions using Altair Feko

Новое видео на канале Pcb-tracing: Вебинар Altium 365: Поиск и использование компонентов

Новое видео на канале Anurag Bhargava: RFPro-12: Creating Component Models for RFPro

Новое видео на канале Eremex DD: Практический пример аналогового моделирования в Delta Design SimOne

Компания Altair выпустила специалую версию своего продукта Altair PollEx для пользователей Altium, что позволит заранее оценивать и оптимизировать разрабатываемые печатные платы, а также улучшать производствопригодность.

Новое видео на канале Robert Feranec: How To Build Your Own Box for a PCB Board (Using Free Fusion 360 Software) - Step By Step Tutorial.

Интересная статья: A New Dimension Of Complexity For IC Design. Static timing analysis becomes more difficult in 3D.

Новое видео на канале Keysight Design Software: ANN Model Generator in PathWave Device Modeling (IC-CAP)

Интересная статья: SIP Modules Solve Numerous Scaling Problems – But Introduce New Issues

Интересное видео на канале European Materials Modelling Council: Part VIII Malgorzata Celuch QWED

Новое видео на канале Altair University: IInstalled Antenna Performance and Co-Site Interference Mitigation with Altair Feko.

Новое видео на канале Robert Feranec: What is The Right Pad Shape to use in PCB Footprints? - Tom Hausherr

Новое видео на канале DipTrace: Copper Pour to Net Connection. DipTrace Feature Review

Новое видео на канале MATLAB: Signal Integrity Analysis and Regression Testing for Serial Links

Новое видео на канале Tensorbundle: HFSS Tutorial: Plotting E-field Magnitude & Phase Along a Line Using Field Calculator.

Новое видео на канале Siemens Software: Package Designer capabilities with IC Packaging

Новое видео на канале FPGA Systems: Simtera. Последние обновления в работе отечественного HDL-симулятора и синтезатора.

Новая статья на сайте компании TICRA: Large European Deployable Reflector: RF Modeling and Measurement Correlation

Новое видео на канале Robert Feranec: Microcontroller in FPGA? This is how to do it … - Step by Step Tutorial - Adam Taylor

Новое видео на канале Pcb-tracing: Вебинар Altium 365: Администрирование и управление библиотеками

Новое видео на канале Keysight Design Software: How to Apply an SMD Calibration to a Port

Интересная статья: Utilizing Fine Line PCBs with High Density BGAs. Large ball count, fine pitch #BGA parts on a circuit board drive the number of signal layers required to escape the BGA grid into the coarser routing field of that board.

Новая статья на сайте WIPL-D: Influence of a Fence Located Between Communicating Drones

Компания Polar Instruments сообщила о выходе новой версии Speedstack 22.01. Ввведена поддержка привязки snap to, как ранее в Si8000 и Si9000. Также реализован допуск 0% на толщину диэлектрика.

Новое видео на уканале Modelithics: Modelithics Short Waves: Utilizing the Tolerance Parameter in Keysight PathWave ADS.

Новое видео на канале DownStreamtech: Editing Template Elements in BluePrint

Новая статья на сайте компании TICRA: Computational Investigation of the DTU-ESA 12 GHz VAST12 Validation Standard Antenna to Identify Features Contributing to the Radiated Field

Новое видео на канале Keysight Design Software: Introduction to Simulating with Memory Designer

Новое видео на канале Anurag Bhargava: RFPro-11: Tuning and Vendor Models in RFPro

Новое видео на канале Synopsys: How to Design Functionally Safe Automotive SoCs from the Processor Level

Новое видео на уканале Modelithics: Modelithics Short Waves: Discrete Optimization with Modelithics Models in Keysight PathWave ADS.

Новое видео на канале DipTrace: Export to Altium. DipTrace Feature Review

Новое видео на канале Robert Feranec: Every PCB Designer Needs To Know This About PCB Track Impedance - TDR - Eric Bogatin.

Новое видео на канале Anurag Bhargava: RFPro-10: RF PCB Analysis with RFPro - Advanced

Новое видео на уканале Modelithics: Modelithics Short Waves: Using Modelithics Models with RFPro in Keysight PathWave ADS.

Компания Future Facilities анонсировала новую версию своего пакета теплового моделирования 6SigmaET 16. 6SigmaET by Future Facilities has launched its latest software version, Release 16, introducing an array of new and improved features and functionality.

Новое видео на канале Anurag Bhargava: RFPro-9: RF PCB Analysis with RFPro-Intermediate

Новое видео на канале Eremex DD: Скругление треков. Часть 2

Компания #Modelithics выпустила очередную версию библиотеки Modelithics Library v21.8 for Cadence Spectre RF Option. Добавлены 22 новые модели.

Новое видео на канале DipTrace: Preparing files for JLCPCB. DipTrace Feature Review

Новое видео на канале EEsof AE Tips: MQA: Compare 2 Models from Same or Different Libraries

Новое видео на канале EDA Direct: StarVision PRO Quick Start Video #10 Calculating the Pin to Pin Resistance of a Net.

Новое видео на канале cae_expert: Анализ влияния высокочастотной помехи на истребитель F-16 в Ansys EMA3D Cable.

Новая статья в блоге Siemens: Leverage EDA data without conversion to generate PCB simulation models and calculation meshes

Новое видео на канале Anurag Bhargava: RFPro-8: RF PCB Analysis with RFPro-Basics

Новое видео на канале Robert Feranec: Why is 50 OHM impedance used in PCB Layout? | Explained | Eric Bogatin

Новое видео на канале FPGA Systems: Высокоуровневый синтез на Intel FPGA: от HLS к OpenCL и OneAPI - Александр Корнев

Новое видео на канале DipTrace: JLCPCB(LCSC) Part Number. DipTrace Feature Review

ИНтересная статья: Fabrication of 3D air-core MEMS inductors for very-highfrequency power conversions.

We report a fabrication technology for 3D air-core inductors for small footprint and very-high-frequency power conversions. Our process is scalable and highly generic for fabricating inductors with a wide range of geometries and core shapes. We demonstrate spiral, solenoid, and toroidal inductors, a toroidal transformer and inductor with advanced geometries that cannot be produced by wire winding technology. The inductors are embedded in a silicon substrate and consist of through-silicon vias and suspended windings. The inductors fabricated with 20 and 25 turns and 280-350 μm heights on 4-16 mm2 footprints have an inductance from 34.2 to 44.6 nH and a quality factor from 10 to 13 at frequencies ranging from 30 to 72 MHz. The air-core inductors show threefold lower parasitic capacitance and up to a 140% higher-quality factor and a 230% higher-operation frequency than silicon-core inductors. A 33 MHz boost converter mounted with an air-core toroidal inductor achieves an efficiency of 68.2%, which is better than converters mounted with a Si-core inductor (64.1%). Our inductors show good thermal cycling stability, and they are mechanically stable after vibration and 2-m-drop tests.

Компания IMST сообщила, что ее продукт EMPIRE-XPU поставила новый рекорд скорости расчета на системе AMD Epyc: 50 млрд FDTD ячеек в секунду. EMPIRE-XPU achieves new speed record on AMD Epyc: 50 billion FDTD cells per second on single-system.

Новое видео на канале Altium Russia: Анализ электрической цепи на примере УМЗЧ Часть 2

Новое видео на канале Anurag Bhargava: RFPro-7: Generating Test Bench and Sub-Circuits from RFPro

Вышла новая версия пакета CST Studio Suite 2022. New version SIMULIA CST Studio Suite 2022 is available.

Архив новостей за 2021 год

Архив новостей за 2020 год

Архив новостей за 2019 год